FH 40 - Heating Dantherm - Free user manual and instructions
Find the device manual for free FH 40 Dantherm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Mobile Electric Heater |
| Brand | Dantherm |
| Model | FH 40 |
| Heating Power | 2000 W (adjustable to 1000 W / 2000 W) |
| Power Supply | 220-240 V ~ 50 Hz |
| Dimensions (H x W x D) | 400 x 300 x 150 mm |
| Weight | 3.5 kg |
| Heating Type | Convector / Fan Heater |
| Adjustable Thermostat | Yes, with range from 5°C to 35°C |
| Frost Protection | Yes, maintains a minimum temperature of 5°C |
| Fan-Only Function | Yes, without heat |
| Noise Level | ~ 45 dB (fan mode) |
| Energy Class | C |
| Protection Rating | IP21 |
| Safety | Automatic shutdown in case of overheating, tipping, and thermal overload |
| Color | White |
| Cable Length | 1.8 m |
| Housing Material | Heat-resistant plastic |
| Air Filter | Washable, removable |
| Maintenance | Regularly dust the grilles and filter |
| Spare Parts Available | Filter, thermostat, heating element (on request) |
| Warranty | 2 years |
Frequently Asked Questions - FH 40 Dantherm
How to install the FH 40 heater?
Place the device on a stable and horizontal surface, at least 50 cm from any obstacle. Plug it into a 220-240 V outlet. Use the adjustment knob to select the desired power and temperature.
How to clean the air filter?
Unplug the device, remove the grille, take out the filter and wash it with warm soapy water. Dry it completely before reinstalling. Clean the filter every 3 months.
What to do if the device no longer heats?
Check that the thermostat is not set too low, that the filter is not clogged, and that the device has not triggered the thermal safety. Unplug it, wait 10 minutes, and plug it back in.
Can the FH 40 be used in a bathroom?
The IP21 rating allows use in damp rooms, but not in the immediate vicinity of a bathtub or shower. Respect the safety distances.
How to activate the frost protection?
Set the thermostat to the "Frost" position (usually marked with a snowflake). The device will maintain a temperature of 5°C to prevent freezing in the room.
What is the noise level in fan-only mode?
In fan-only mode without heating, the noise level is about 35 dB, which is very quiet. In fan heating mode, it can reach 45 dB.
The heater turns off by itself, why?
This may be due to overheating (obstacle in front of the grilles) or tipping. Check that the device is on a flat surface and that the air inlets are not blocked.
Can I schedule the FH 40 to turn on?
This model does not have an integrated timer. You can use an external programmable timer compatible with resistive loads up to 2000 W.
What is the power consumption of the FH 40?
The maximum consumption is 2000 W per hour at max power. In 1000 W mode, it is 1 kWh per hour. Use the thermostat to reduce consumption.
Where to find spare parts for the FH 40?
Contact Dantherm customer service at 0800-xxx-xxx or check the list of authorized dealers on the official website. Common parts like the filter are available online.
User questions about FH 40 Dantherm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Heating in PDF format for free! Find your manual FH 40 - Dantherm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FH 40 by Dantherm.
USER MANUAL FH 40 Dantherm
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Dantherm
Model : FH 40
Category : Heating