CT 2010/IN - Cooker Rommelsbacher - Free user manual and instructions
Find the device manual for free CT 2010/IN Rommelsbacher in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Induction hob |
| Brand | Rommelsbacher |
| Model | CT 2010/IN |
| Number of Cooking Zones | 4 |
| Power Levels | 9 + Boost function |
| Control Type | Touch control |
| Dimensions (W x D x H) | 590 x 520 x 55 mm |
| Cutout Dimensions (W x D) | 560 x 490 mm |
| Weight | Approx. 8 kg |
| Power Supply | 230 V, 50 Hz, 7200 W total |
| Safety Features | Child lock, residual heat indicator, automatic switch-off |
| Functions | Timer, booster, keep warm, pause |
| Cleaning and Maintenance | Glass ceramic surface; wipe with damp cloth, use ceramic hob cleaner |
| Installation Type | Built-in |
| Color | Black |
| Energy Efficiency Class | A |
| Warranty | 2 years |
| Reparability | Spare parts available; service network |
Frequently Asked Questions - CT 2010/IN Rommelsbacher
What cookware can I use on this induction hob?
Only ferromagnetic cookware with a flat base, such as stainless steel, cast iron, or enameled steel. Check with a magnet if unsure.
How do I clean the hob?
Wait for the surface to cool. Use a damp cloth with mild detergent or a special ceramic hob cleaner. Avoid abrasive pads.
Does the hob have a child lock?
Yes, the CT 2010/IN includes a child lock to prevent accidental operation. Activate it by pressing the lock button for 3 seconds.
What does the residual heat indicator mean?
The indicator shows that the cooking zone is still hot. Do not touch it until the indicator goes out to avoid burns.
Can I use a pot with a diameter smaller than the cooking zone?
Yes, but the zone may not detect very small pans. Minimum pan diameter is typically 12 cm for proper induction.
How do I install the hob?
Installation must be done by a qualified electrician. Ensure the cutout dimensions match and the hob is properly connected to the mains.
What is the Boost function?
Boost provides extra power for rapid heating. It activates for a limited time (e.g., 10 minutes) then returns to the set level.
Why does my hob turn off automatically?
The hob has an automatic safety shut-off if no pot is detected or if cooking time exceeds the preset limit. This prevents overheating.
Can I use a timer for each zone?
Yes, you can set a timer independently for each cooking zone. The hob will turn off the zone when time is up.
What should I do if an error code appears?
Refer to the manual for specific error codes. Common issues include overheating, incorrect voltage, or sensor failure. Try resetting the hob by disconnecting power for a minute.
User questions about CT 2010/IN Rommelsbacher
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooker in PDF format for free! Find your manual CT 2010/IN - Rommelsbacher and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CT 2010/IN by Rommelsbacher.
USER MANUAL CT 2010/IN Rommelsbacher
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rommelsbacher
Model : CT 2010/IN
Category : Cooker