SPL

Channel One 2950 - Receiver SPL - Free user manual and instructions

Find the device manual for free Channel One 2950 SPL in PDF.

📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SPL Channel One 2950 - page 4
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type CB Radio Receiver
Brand SPL
Model Channel One 2950
Frequency Range 26.965 - 27.405 MHz (40 CB channels)
Modulation Type AM
Power Supply 13.8 V DC (nominal)
Current Consumption (Receive) 300 mA
Audio Output Power 2 W
Dimensions (W x H x D) 200 x 60 x 150 mm
Weight 1.5 kg
Antenna Connector SO-239
Sensitivity < 0.5 µV (S/N 10 dB)
Selectivity > 60 dB at ±10 kHz
Operating Temperature -20°C to +50°C
Controls Channel selector, volume, squelch, RF gain, noise blanker
Compliance FCC Part 95, CE
Recommended Use Vehicle or base station with 12V power
Maintenance Clean with a soft dry cloth; do not use solvents.
Safety Do not disassemble; use only specified power supply.
Reparability Contact authorized service center for repairs.
Warranty 1 year limited warranty

Frequently Asked Questions - Channel One 2950 SPL

What is the frequency range of the SPL Channel One 2950?
The receiver covers the standard CB band from 26.965 to 27.405 MHz, providing access to all 40 CB channels.
How do I adjust the squelch?
Turn the squelch control clockwise until background noise disappears. Set it just above the noise threshold for weak signals.
What type of antenna connector does it use?
It uses a standard SO-239 connector, compatible with most CB antennas using a PL-259 plug.
Why is there no sound from the speaker?
Check that the volume is turned up, squelch is not set too high, and the antenna is properly connected. Also verify power supply.
Can I use this receiver with a 12V car battery?
Yes, it is designed for 13.8V DC nominal, so a standard 12V car battery or regulated power supply works.
What is the power consumption during reception?
It draws approximately 300 mA at 13.8V, making it efficient for mobile use.
How do I clean the receiver?
Use a soft, dry cloth to wipe the exterior. Do not use chemical cleaners or water.
Does it have a noise blanker?
Yes, it includes a noise blanker feature to reduce impulse noise from ignition systems or other sources.
Is the receiver legal to use in the US?
Yes, it complies with FCC Part 95 regulations for CB radios.
What should I do if the receiver stops working?
First check power and antenna connections. If the issue persists, contact an authorized SPL service center for repair.

User questions about Channel One 2950 SPL

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Receiver in PDF format for free! Find your manual Channel One 2950 - SPL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Channel One 2950 by SPL.

USER MANUAL Channel One 2950 SPL

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SPL

Model : Channel One 2950

Category : Receiver