WJ-NX510K - VCR i-PRO - Free user manual and instructions
Find the device manual for free WJ-NX510K i-PRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | i-PRO |
| Model | WJ-NX510K |
| Dimensions (W x H x D) | 430 mm x 88 mm x 350 mm |
| Weight | 5.2 kg |
| Power Supply | AC 100-240V, 50/60 Hz |
| Power Consumption | Approx. 65 W (without HDD) |
| Video Compression | H.265, H.264, MJPEG |
| Recording Resolution | Up to 4K (3840x2160) |
| Number of Channels | 4 channels (IP cameras) |
| Storage | Up to 2x 4TB SATA HDD (internal) |
| Network Interface | 10/100/1000 Base-T Ethernet |
| Audio | Line in/out, support for two-way audio |
| Alarm I/O | 4 inputs, 2 outputs |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% (non-condensing) |
| Mounting | Desktop or rack-mount (optional kit) |
| Maintenance | Clean with dry cloth; avoid solvents |
| Safety | UL, CE, FCC compliant |
| Spare Parts / Repairability | Contact i-PRO support for service and parts |
Frequently Asked Questions - WJ-NX510K i-PRO
How do I perform a factory reset on the WJ-NX510K?
Press and hold the Reset button on the back panel for 10 seconds while power is on. All settings will revert to defaults.
What is the maximum storage capacity supported?
The WJ-NX510K supports up to two internal SATA HDDs, each up to 4TB, totaling 8TB.
Can I access the recorder remotely?
Yes, via the i-PRO Network Disk Recorder app or web browser. Ensure port forwarding is configured on your router.
What video formats are supported for recording?
The recorder supports H.265, H.264, and MJPEG compression formats.
How many IP cameras can I connect?
This model supports up to 4 channels of IP cameras.
What is the default IP address of the WJ-NX510K?
The default IP is 192.168.0.10 with subnet mask 255.255.255.0.
How do I configure motion detection recording?
Go to Recording Settings in the web interface, enable motion detection on desired camera channels, and set schedule and pre/post recording times.
Can I export recorded video?
Yes, use the Export function in the playback interface to save clips in AVI or MP4 format to a USB drive or network location.
What does the front panel LED indicate?
The POWER LED shows steady green when on. The REC LED blinks during recording, and ALARM LED lights when an alarm is triggered.
How do I update the firmware?
Download the latest firmware from i-PRO support site, upload via Maintenance > Firmware Update in the web interface. Do not power off during update.
User questions about WJ-NX510K i-PRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your VCR in PDF format for free! Find your manual WJ-NX510K - i-PRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WJ-NX510K by i-PRO.
USER MANUAL WJ-NX510K i-PRO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : i-PRO
Model : WJ-NX510K
Category : VCR