WJ-NX410K - VCR i-PRO - Free user manual and instructions
Find the device manual for free WJ-NX410K i-PRO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | i-PRO |
| Model | WJ-NX410K |
| Dimensions (W x H x D) | 430 x 88 x 350 mm (16.9 x 3.5 x 13.8 inches) |
| Weight | Approx. 5.5 kg (12.1 lbs) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Power Consumption | Approx. 80 W (without HDD) |
| HDD Capacity | 4 SATA HDD slots, up to 16 TB total |
| Recording Resolution | Up to 4K (3840 x 2160) |
| Recording Frame Rate | Up to 30 fps per channel |
| Number of Channels | Up to 16 IP camera channels |
| Video Compression | H.265, H.264, MJPEG |
| Network Interface | 2 x Gigabit Ethernet (RJ-45) |
| Audio | 1x audio input, 1x audio output (RCA) |
| Alarm I/O | 16x alarm input, 4x relay output |
| Video Output | HDMI, VGA, BNC |
| Operating Temperature | 5°C to 45°C (41°F to 113°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Compliance | CE, FCC, UL |
| Mounting | Rack-mountable (optional brackets) |
Frequently Asked Questions - WJ-NX410K i-PRO
What is the maximum storage capacity of the WJ-NX410K?
The recorder supports up to 4 SATA hard drives, with a maximum total capacity of 16 TB (4 x 4 TB).
How many IP cameras can be connected?
Up to 16 IP cameras can be connected, supporting resolutions up to 4K.
Does the device support PoE?
No, the WJ-NX410K does not have built-in PoE. Cameras must be powered separately or via an external PoE switch.
What video compression formats are supported?
The recorder supports H.265, H.264, and MJPEG compression for efficient storage and bandwidth.
Can I access the recorder remotely?
Yes, remote access is available via web browser or the i-PRO mobile app using the network interface.
What is the power consumption?
Approximately 80 W without hard drives installed; actual consumption may vary with HDDs.
Is the unit rack-mountable?
Yes, it can be mounted in a 19-inch rack using optional brackets.
What alarms inputs and outputs are available?
There are 16 alarm inputs and 4 relay outputs for integration with external sensors and devices.
How do I reset the device to factory defaults?
Press and hold the reset button on the rear panel for 10 seconds while the unit is powered on.
What is the warranty period?
The standard warranty is 2 years from the date of purchase. Extended warranties may be available.
User questions about WJ-NX410K i-PRO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your VCR in PDF format for free! Find your manual WJ-NX410K - i-PRO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WJ-NX410K by i-PRO.
USER MANUAL WJ-NX410K i-PRO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : i-PRO
Model : WJ-NX410K
Category : VCR