Texas

WP358S - Water pump Texas - Free user manual and instructions

Find the device manual for free WP358S Texas in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Texas WP358S - page 10
View the manual : Dansk DA English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Water Pump
Brand Texas
Model WP358S
Power Source Electric (230V ~ 50Hz)
Rated Power 1100 W
Max Flow Rate 5500 L/h
Max Head 35 m
Max Suction Lift 8 m
Inlet/Outlet Diameter 1 inch (25.4 mm)
Dimensions (L x W x H) 400 x 250 x 300 mm
Weight 12 kg
Body Material Cast Iron
Impeller Material Stainless Steel
Self-Priming Yes (up to 3 m)
Thermal Overload Protection Yes
IP Rating IPX4
Noise Level 75 dB(A)
Max Liquid Temperature 35 °C
Maintenance Clean inlet filter regularly; check impeller for wear
Safety Features Use with residual current device; do not run dry
Spare Parts Availability Contact Texas customer service or authorized dealers
Warranty 2 years (subject to registration)

Frequently Asked Questions - WP358S Texas

How do I prime the pump before use?
Fill the pump housing and suction pipe completely with water through the priming plug. Ensure no air pockets remain. Do not run the pump dry.
Can the pump run dry?
No, running the pump dry will damage the mechanical seal and impeller. Always ensure there is water in the housing before starting.
What type of oil does the pump require?
This electric pump does not require oil. It is a self-lubricating design. For models with an oil chamber, check the manual.
How do I clean the pump after use?
Disconnect the pump and flush it with clean water to remove debris. Clean the inlet filter and allow it to dry before storage.
What is the maximum liquid temperature allowed?
The maximum liquid temperature is 35°C. Do not pump hot water as it may damage the pump.
What is the noise level of the pump?
The noise level is approximately 75 dB(A) at 3 meters. Use ear protection if operating in enclosed spaces.
Is the pump suitable for irrigation?
Yes, this pump is designed for irrigation, garden watering, and general water transfer. Ensure the suction lift is within the specified limit.
How should I store the pump during winter?
Drain all water from the pump and hoses. Store in a dry, frost-free place. Remove the plug and store it separately if possible.
What is the suction lift capability?
The maximum suction lift is 8 meters. For best performance, keep the suction lift as low as possible and use a foot valve.
Does the pump have thermal overload protection?
Yes, the pump is equipped with thermal protection. If the motor overheats, it will automatically shut off. Allow it to cool before restarting.

User questions about WP358S Texas

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Water pump in PDF format for free! Find your manual WP358S - Texas and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WP358S by Texas.

USER MANUAL WP358S Texas

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Texas

Model : WP358S

Category : Water pump