DCB100 - Uncategorized DEWALT - Free user manual and instructions
Find the device manual for free DCB100 DEWALT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Battery charger |
| Brand | DeWalt |
| Model | DCB100 |
| Input voltage | 120 V AC (North American standard) |
| Output voltage | 20 V MAX |
| Charging current | 2 A |
| Supported battery type | Li-Ion 20 V MAX (models DCB20xx) |
| Dimensions (L x W x H) | 15 x 10 x 8 cm (approximate) |
| Weight | 0.45 kg (approx.) |
| LED indicators | Yes, indicates charging status |
| NiCd battery compatibility | No, Li-Ion only |
| Overcharge protection | Yes, built-in |
| Cooling | Passive (fanless) |
| Housing material | Impact-resistant plastic |
| Color | Yellow and black (DeWalt) |
| Cable length | 1.5 m (approx.) |
| Maintenance | Clean with a dry cloth; do not use solvents |
| Operating conditions | Indoor only, temperature 0-40°C |
| Safety | Compliant with CE, UL standards; short circuit protection |
| Warranty | 1 year (depending on country) |
Frequently Asked Questions - DCB100 DEWALT
Which batteries are compatible with the DeWalt DCB100 charger?
The DCB100 charger is designed for Li-Ion 20 V MAX batteries from the DCB20x series (e.g., DCB200, DCB201, DCB203). It does not charge NiCd or NiMH batteries.
How to interpret the LED indicators on the DCB100?
A solid green light indicates full charge. A flashing green light means the battery is charging. A flashing red light signals an error (battery too hot/cold or faulty).
How long does it take to charge a battery with the DCB100?
Charging time depends on battery capacity. For a standard 2 Ah battery, expect about 60 minutes with a 2 A charging current.
Can I leave the battery on the charger after charging?
Yes, the charger switches to trickle charge mode to prevent overcharging. However, it is recommended to remove the battery after a few days.
What to do if the red light flashes?
A red flashing indicates an anomaly. Check the battery temperature (between 0 and 40°C). If the problem persists, the battery or charger may be faulty.
Can the DCB100 be used outdoors?
No, the charger is intended for indoor use only. It must not be exposed to rain or moisture.
How to clean the DCB100 charger?
Unplug the charger before cleaning. Use a soft dry cloth to remove dust. Do not use water, solvents, or abrasive products.
Is the charger compatible with 18 V DeWalt batteries?
No, the DCB100 is specifically designed for 20 V MAX batteries. 18 V batteries (NiCd or older Li-Ion) are not compatible.
What is the warranty on the DCB100 charger?
DeWalt typically offers a one-year warranty on chargers, but it may vary by country. Check the manual or DeWalt website for details.
Does the charger overheat during charging?
The charger may become warm, which is normal. If it becomes very hot, check ventilation. Do not cover the charger during use to prevent overheating.
User questions about DCB100 DEWALT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual DCB100 - DEWALT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCB100 by DEWALT.
USER MANUAL DCB100 DEWALT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DEWALT
Model : DCB100
Category : Uncategorized