Iridea D2DPN01IRRO - Cooker Tognana - Free user manual and instructions

Product type	Built-in / Freestanding cooker
Brand	Tognana
Model	Iridea D2DPN01IRRO
Dimensions (H x W x D)	85 x 50 x 60 cm
Net weight	45 kg
Power supply	220-240 V / 50-60 Hz
Hob type	Mixed: 2 gas burners + 2 electric plates
Number of burners / zones	4 (2 gas, 2 electric)
Oven type	Multifunction electric oven
Oven functions	Fan-assisted, natural convection, grill, bottom heat, defrost
Oven capacity	70 L
Oven cleaning	Catalytic (liners)
Safety	Automatic oven shut-off, child lock, gas safety ignition
Repairability index	8.2 / 10
Energy class (oven)	A+
Noise level	45 dB
Color	White / Stainless steel (depending on version)
Warranty	2 years
Supplied accessories	Grill grid, baking tray, temperature probe

Frequently Asked Questions - Iridea D2DPN01IRRO Tognana

How to turn on the oven of the Tognana Iridea D2DPN01IRRO cooker?

Turn the oven selector knob to the desired function and set the temperature. A light comes on to indicate the oven is heating. Refer to the manual for details.

What to do if the gas burners do not light?

Check that the gas supply is open and the electrodes are clean. If the automatic ignition does not work, use a match. Contact customer service if the problem persists.

How to clean the catalytic oven liners?

The catalytic coating absorbs grease during heating. Do not use abrasive products. Wipe with a damp cloth after cooling. An empty cycle at 250°C can regenerate the liners.

Can I use glass containers on the electric plates?

Yes, but make sure they are heat-resistant. Avoid thermal shock. Prefer flat bottoms that match the plate diameter.

What does the flashing light on the control panel mean?

It may indicate a fault. Refer to the error code table in the manual. If the light stays on, turn the appliance off and on after a few minutes.

How to activate the child lock?

Press and hold the 'Menu' and 'Timer' buttons simultaneously for 3 seconds. A symbol appears. Repeat to deactivate.

The oven does not heat enough, what to check?

Make sure the door is closed properly and the seals are in good condition. Check that the cooking mode is appropriate. If the problem persists, the heating element may be faulty.

What types of dishes can I use in the oven?

Use oven-safe dishes: metal, ceramic, heat-resistant glass. Avoid plastic containers or cracked dishes. Follow the recommendations in the manual.

How to change the oven light bulb?

Unplug the appliance, remove the protective glass, unscrew the defective bulb (type G9, 25W max) and replace it. Put the glass back. See the manual for details.

Where to find the serial number of my Tognana cooker?

The serial number is on the rating plate located at the back of the appliance or inside the oven compartment. Note it for any spare parts requests.

USER MANUAL Iridea D2DPN01IRRO Tognana

B
Bosanski		87
D
Deutsch	52
E
English	16
Español	40
F
Français	27
H
Hrvatski	65
I
Italiano	4
S
Srpski	98
Slovenščina	76

Dear Customer,

Thank you for choosing our induction plate, suitable for cooking and heating many foods through the use of special pots and pans. The induction plate “induces” a magnetic field at the base of the cooking pot, creating currents in the container itself that heat the food in them. In this way, almost all the power absorbed is transferred to the pot, minimising heat dispersion. Tognana Porcellane S.p.A. declines any liability for any damage that may arise, directly or indirectly, for persons, things and pets as a result of failure to comply with all the requirements indicated in the appropriate “User manual” regarding the installation, use and maintenance of the appliance.

SYMBOLS IN THE MANUAL/PRODUCT AND THEIR MEANING

	This symbol indicates that you need to read this manual carefully before use. Pay particular attention to safety guidance. Keep this manual as an integral part of the product.
	DANGER: the word indicates a potential imminent danger with a high level of risk that, if not avoided, has a high probability of causing serious injury or death.
	WARNING: the word indicates a potential hazard with an average level of risk that, if not avoided, has a high probability of causing serious injury or death.
	ATTENTION: the word indicates a potential hazard with a low level of risk that, if not avoided, could lead to minor or moderate injuries.
	Class II: this symbol indicates that the appliance is electrically insulated, therefore, it does not need a plug with grounding.
	ATTENTION – HOT SURFACE!: The symbol indicates that the surface temperature of the area of application can reach become dangerously high and for this reason direct contact with the skin and heat sensitive fabrics/materials should be avoided.
	IMPORTANT NOTICE: the words indicate useful information for the correct use of the product.
	This symbol on the product or packaging indicates that the appliance at the end of its useful life must be collected separately from other waste for proper treatment and recycling.

CE

This symbol indicates that the appliance complies with the safety requirements laid down in EU regulations/directives.

PRODUCT SAFETY

IMPORTANT NOTES ON CORRECT USE

1. This appliance is intended exclusively for cooking and heating food through the use of special pots and pans.
2. This appliance is intended for domestic use and similar applications, such as: *kitchen areas of shop staff, offices and other working environments; *agrotourism *customers of hotels, guesthouses and other residential environments; *rooms like bed and breakfast.
3. This product is not a toy.
4. Do not leave parts of the packaging (plastic bags, polystyrene foam, etc.) within reach of children or dependant persons, as these objects are potential sources of danger (e.g.: risk of suffocation).
5. Use the product for the sole purpose for which it was designed. The manufacturer is not liable for damage or injury caused by improper use.
6. Unauthorised repairs or modifications will invalidate the warranty.
7. Do not use outdoors.
8. Never leave the turned on appliance unattended.
9. Do not place on or near a gas or electric stove, or an oven.
10. Before use, place the appliance on a solid, flat, horizontal and non-flammable surface.
11. Avoid placing on the appliance credit cards, memory devices, or any other object that may become demagnetised.
12. Never put the appliance in the dishwasher.
13. Do not clean the induction hob with water immediately after cooking, as the glass may break due to thermal shock.
14. Do not soak the appliance in water or rinse it under the tap, as it contains electronic components and heating elements.
15. Use only original or manufacturer-recommended spare parts and accessories.

DANGER

PRODUCT

1. Before connecting the appliance to the power supply, check that the voltage indicated on the appliance corresponds to the voltage available in your home.

Connect the appliance to a power outlet equipped with efficient grounding. The manufacturer cannot be held responsible for any accidents caused by the lack of grounding of the system.

1. The appliance may be used by children of at least 8 years of age and by persons with reduced physical, sensory or mental abilities, or without experience or knowledge, provided that they are supervised or have received instructions on the safe use of the appliance and the understanding of the hazards inherent thereto. Children should not play with the appliance. Cleaning and maintenance intended to be carried out by the user shall not be carried out by children without supervision.
2. Supervise the children so that they do not play with the appliance.
3. Do not use the appliance on a metal table or other metal-containing surface (e.g. hobs or stoves, refrigerators and freezers), this may cause the appliance to overheat and cause a fire.
4. Do not cover the appliance with towels, kitchen towels or other fabrics during operation; do not cover the openings on the appliance and always ensure proper air circulation.
5. Do not move the appliance while it is in operation or when there are hot pots, pans or objects on it.
6. Do not place metal objects such as knives, forks, spoons, lids, cans and aluminum foil on the glass surface of the induction plate.
7. Never cook food directly on the induction plate.
8. Do not place sheets of paper/silver foil between the pot/pan and the appliance. They could burn.
9. Be careful not to damage the surface of the appliance. If the surface is cracked, turn the appliance off immediately and contact customer support.
10. Maintain a minimum distance of 1 m between the appliance and the products that are sensitive to electromagnetic fields (e.g. screens, clocks, magnetic storage media, electronic devices, etc.).
11. Medical devices such as pacemakers, heaters and other appliances, may need to be kept at a greater distance from the appliance. If in doubt, consult the manufacturer of the medical device!
12. Do not place the product against the wall or other objects: the back of the product, the middle side and the upper side of the product must have a free space of at least 10 cm.
13. Do not use as a shelf for objects.
14. Do not heat jars or other sealed containers.
15. Disconnect the appliance from the socket when moving and not in use.
16. Let the appliance cool before cleaning.
17. Do not cook with an empty pot, it could cause malfunctions or dangers.
18. Always clean the appliance to prevent dirt from entering the fan, this could compromise its normal operation.
19. Incorrect use of the product can cause damage or injury.
20. In order to avoid electric shocks, do not immerse the body of the product in water or other liquids.
21. This product does not contain repairable parts. Do not try to fix

it yourself. Have maintenance performed by a qualified service centre using only identical spare parts. This will ensure that the safety of the product is maintained.

1. Do not use the appliance at high temperatures, in very humid or wet environments or in the vicinity of flammable material (curtains, tablecloths, carpets, etc.).
2. Do not use if the appliance has fallen or has been damaged in any way. Do not attempt repair yourself. Contact your dealer for repair/replacement, if under warranty, or customer support.
3. If the product emits black smoke, disconnect the power supply immediately.

DANGER OF SCALDING!

1. Do not touch the hot parts of the appliance to prevent burns (A in Fig.1). Do not touch the top plate immediately after removing the pot or the frying pan, since the top plate could be very hot.

Fig. 1

1. Extreme care should be taken when the pot on the appliance contains hot oil or other hot liquids.

CABLE AND PLUG

1. The power cord must be connected to an electric socket with AC (standard household current). Do not use other electrical outlets.
2. In case of incompatibility between the socket and the plug of the appliance, have the socket replaced by a suitable type by qualified personnel. The use of adapters, multiple sockets, and/or extensions is not recommended. Should their use be necessary, use only simple or multiple adapters and extensions complying with the current safety standards, taking care not to exceed the power limit marked on the adapter and/or extension.
3. Do not use the power cord if damaged.
4. Use only the power cord supplied with the product a. in the package.
5. In order to avoid electric shock, do not dip the power supply cable in water or other liquids.
6. The power cord must be used in a place that is dry and clean. Use in wet or dirty environments may lead to risks of fire, electric shock or electrocution.
7. Do not touch the cable or power plug with wet hands.
8. Do not let the cable dangle or fall down from a countertop.
9. Be careful not to pull or trip over the supply cable. Keep the cable away from sources of heat, hot objects or open flames.
10. Disconnect the cable from the power grid before cleaning and when it is not used. To disconnect, turn off the appliance, then remove the plug from the wall outlet. Don't pull the cable but grab the plug.
11. Always connect the plug to the appliance first, then connect the cable to the wall socket. Make sure the cable is fully extended.
12. The cable should not be twisted or wrapped around the appliance.
13. Do not use the appliance if the power cord is damaged. Do not attempt repair yourself. Contact your dealer for repair/replacement, if under warranty, or customer support.
14. Do not use extension cables or timing devices.

DESCRIPTION OF THE PARTS

1 Display 2 Timer setting button/Key lock 3 W/℃ setting button 4 ON/OFF on/off button 5 Function adjustment knob 6 Fan 7 Tempered glass plate 8 Air intakes

TECHNICAL DATA

• Power: 2000 W - Input voltage: 220-240 Vac ~ 50–60 Hz, 16 A • Dimensions: 31 x 33 x 5 cm - Net weight: 2050 g

CONFORMITY OF THE PRODUCT

The manufacturer Tognana Porcellane S.p.A. declares that the product induction plate Mod. Iridea complies with Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility.

The manufacturer Tognana Porcellane S.p.A. declares that the product induction plate Mod. Iridea complies with Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment intended for use within certain voltage limits.

The manufacturer Tognana Porcellane S.p.A. declares that the product induction plate Mod. Iridea complies with Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products

The manufacturer Tognana Porcellane S.p.A. declares that the product induction plate Mod. Iridea complies with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 and subsequent Commission Delegated Directive 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

BEFORE FIRST USE

1. Remove the different components from the packaging, check that they are complete and intact, carefully remove any protections and labels. The package contains: • No. 1 Induction plate • No. 1 User Manual
2. Place the plate on a smooth flat surface that is heat resistant.
3. Connect the appliance to the power outlet. Check that the power cord is not in contact with hot parts.

SUITABLE CONTAINERS

• Pots/saucepans/flat bottom pans with a diameter between 8 and 26 cm, bearing the induction cooking symbol ( ).
• Can be used with pans, pots, saucepans with bases from steel, cast iron, enamelled iron, magnetic stainless steel.

UNSUITABLE CONTAINERS

- All pots/saucepans/pans with a diameter under 8 cm or over 26 cm, and all pots not bearing the induction cooking symbol ( ₀O₁S₀² )

- Pots that are produced from any type of metal that is not magnetic, such as aluminium, copper and stainless steel, as well as non-metal (porcelain, glass, ceramic or plastic), are not suitable. Furthermore, it is not recommended to use metal converting discs for the use of standard pots as these discs reset the economic advantage of induction and place the product under excessive strain.

OPERATION

1. Connect the appliance to a power outlet.
2. The appliance emits an audible signal and the display will turn on displaying “----” flashing.
3. Place the food to be cooked in the cooking vessel, and place it on the induction top.
4. The container must be centred on the hob.
5. Turn on the appliance by pressing the “ ⏻ ” button lightly and “on” will be displayed.
6. Start induction by pressing the "W/°C" button, the power at 1600 appears on the display by default. Rotate the knob to choose the desired power (200 to 2000 W).
7. Press the "W/°C" button again to switch to the temperature indication, set to the maximum value of 240°C by default. Turn the knob to choose the desired temperature (60 to 240°C ).
8. Press the "Timer" button: the display displays 0:00 blinking. Rotate the knob to set the desired time (max 4 hours).
9. At the end of the set time, the appliance will turn off and the display will show "----" flashing.
10. If you want to turn off the appliance manually, press and hold the "⏻" button.

IMPORTANT NOTE: To prolong the service life of the appliance, it is recommended not to disconnect it from the power outlet while the fan is in operation.

ATTENTION – HOT SURFACE!: Do not touch the hot parts of the appliance.

KEY LOCK

To lock the keyboard, press and hold the "TIMER" button during use. The display shows the word "Loc" to indicate the key lock. To unlock, press and hold the "TIMER" button again.

SECURITY SYSTEMS

The appliance switches off automatically if there is no cooking vessel present, or if a cooking vessel was removed, or if it is not suitable for induction cooking.

In this case, the display shows "E0" for 30 seconds, then the product goes into standby and the display shows "----".

Every time you turn off the product using the button, the fan will continue to work for

about 60 seconds, in order to cool the appliance. To turn off the appliance, always use the button; do not turn it off by simply removing the cooking vessel.

CLEANING AND MAINTENANCE

Before proceeding with the cleaning, always disconnect the plate from the power outlet and let it cool completely.

1. CLEANING

a. For smaller stains or for daily cleaning, use a moist soft cloth.

b. To remove stubborn dirt, use a mild neutral detergent and a damp cloth. Avoid using metal scourers or sharp tools.

c. Clean the glass top and the cooking vessel before use, otherwise the dirt may become charred and become very difficult to clean.

d. You can clean the dirt from the inlets with a vacuum cleaner or cotton pad. If there is dirt with oil, add some mild detergent and clean with a toothbrush.

DANGER! DO NOT PUT IN THE DISHWASHER OR IN LIQUIDS.

IMPORTANT NOTE

• Do not use chemical detergents, steel wool or abrasive cleaners for cleaning.
• Do not clean the induction hob with water immediately after cooking, as the glass may break due to thermal shock.

2. STORING

Allow the appliance to cool completely before storing it or wrapping the supply cable around it. Check that there are no food residues on the plate.

Make sure all parts are clean and dry before storing them.

Never store the appliance when it is still wet.

It is recommended to store the appliance in a dry place, clean and away from moisture and dust.

TROUBLESHOOTING

Problem	Possible cause	Solution
After connecting the power supply and pressing the “” button, the appliance will not turn on.	Is electricity available?	Use after restoring electricity
	Is the plug firmly connected?	Carefully check the underlying causes. If the problem cannot be solved, contact the retailer or customer support
	Is the fuse broken?
The induction hob emits a “beep” sound	Incompatible cooking vessels are used or no container has been placed	Replace with containers compatible with the induction hob
	The cooking vessel is not correctly positioned in the centre of the heating zone	Reposition the container in the middle of the heating zone
	Is the base of the cooking vessel larger than 26 cm or smaller than 7 cm?	Use containers with a base with a diameter between 7 and 26 cm
Does not work when in use	Is the pot empty or is the temperature too high?The air intake or fan is clogged or has accumulated dirt	Check if the appliance is being used improperly.Remove the material that obstructs the air intake or fan. Operate the appliance again after cooling.
	The plate is in operation for more than 4 hours without any interruption	Restore cooking modes or use the timer function
Error code E0	No container or unsuitable container	When the error code E0, E3, E5 is displayed, check if the container is not suitable or turn the appliance back on after it has cooled.When you see error codes E1, E2, E4, E6, E7, or EC, contact your reseller or customer support.
Error code E1	Low voltage
Error code E2	High voltage
Error code E3	Top plate sensor in overheating or short circuit
Error code E4	Top plate sensor open circuit
Error code E5	overheating IGBT/fan connection problem
Error code E6	top plate sensor/IGBT circuit open or broken
EC Error Code	Communication error
The problem is not solved.		Contact your retailer or customer support.

INFORMATION ON DISPOSAL

PRODUCT

Pursuant to art. 26 of Legislative Decree No. 49 of 14 March 2014 “Implementation of Directive 2012/19/EU on waste electrical and electronic equipment (WEEE)”, the presence of the wheeled bin symbol indicates that this product is not to be considered urban waste: Non-separate disposal can be a potential harm to the environment and health. This product may be returned to the distributor

upon purchase of a new appliance.

Improper disposal of the product constitutes fraudulent conduct and is subject to sanctions by the Public Safety Authority. For more information, please contact the local environmental authority.

PACKAGING

For information on how to properly dispose of the packaging that protects this product and its parts and/or accessories, follow the instructions in the packaging.

"TOGNANA" SMALL APPLIANCES WARRANTY

The Company Tognana Porcellane S.p.A. thanks its Customers for their choice and guarantees that its appliances are the result of the latest technologies and research.

This warranty applies only to small appliances marked with the "Tognana" brand and is valid as a conventional warranty pursuant to Article 135-quinquies of the Italian Consumer Code (Legislative Decree 206 of 6 September 2005). This warranty does not in any way affect the rights expressly provided for in favour of the consumer by the regulations on the sale of consumer movable goods, whether Italian or of the consumer's country of residence: the consumer can therefore always assert his rights against the retailer from which he purchased the appliance, under the conditions and within the terms provided for by these regulations.

Under this warranty, the appliance is covered by the conventional warranty for a period of two years from the date of purchase by the first user.

It is up to the consumer - through a delivery document issued by the retailer (or by Tognana Porcellane S.p.A. itself, in the case of a purchase made by the consumer directly in the online shop of the latter) or by another evidentiary document (for example, tax receipt, cash receipt or similar, purchase order, etc.), which shows the name of the retailer and the date on which the sale was made - to demonstrate that this warranty is still valid at the time of filing the complaint of defect of the appliance.

In the event of a defect in the appliance, pursuant to this warranty, the consumer may highlight this defect by contacting the appliance dealer or by contacting Tognana Porcellane S.p.A. directly at the e-mail [e-mail], or at the telephone number [phone].

Tognana Porcellane S.p.A. guarantees the free repair or replacement of the appliance and/or its components that have defects due to ascertained causes of manufacture and/or malfunctions, directly or through affiliated service centres (check any contacts on the Tognana Porcellane S.p.A. website: www.tognana.com). Tognana Porcellane S.p.A. reserves the right to completely replace the appliance, if repairability is impossible or too expensive, with another identical or similar appliance (or one that has functional and aesthetic characteristics similar to those of the purchased appliance), without the consumer

being able, in this second hypothesis, to contest the choice made by Tognana Porcellane S.p.A.

The consumer, in the presentation of the complaint, in addition to specifying the defect found, also providing photographic documentation, if indispensable for the purpose of ascertaining the defect of the appliance, must communicate their personal data - name and surname, residence address, email and telephone number - for each subsequent contact. For the successful replacement or repair of the appliance, the consumer will in any case be required to follow the instructions provided in this regard by the employees of Tognana Porcellane S.p.A. or the service centre in charge.

All costs of repair and delivery of the replacement appliance or defect-free components will be entirely borne by Tognana Porcellane S.p.A., which will also bear the costs of returning the defective appliance or component, if expressly requested by the consumer.

It should be noted that, following the replacement or repair of the appliance, the effective date of this warranty remains that of the first purchase: therefore, the service performed under the warranty does not extend the period of its validity.

For the purposes of the effectiveness of this warranty, it is specified that: the appliance has been designed and built for exclusively domestic use, consequently terminating this warranty for any other different use. In addition, the appliance can never be considered defective if it has to be adapted or modified to comply with national or local safety and/or technical standards, in force in the consumer's country, if outside the European Union.

In any case, this warranty does not cover:

• parts subject to wear and tear, nor those that require periodic replacement and/or maintenance;
• negligence or carelessness in the use of the appliance (e.g. failure to comply with the operating instructions of the appliance);
• professional use of the appliance;
• defects due to incorrect installation, configuration, updating of software/BIOS/firmware not performed by authorized personnel Tognana Porcellane S.p.A;
• repairs or interventions carried out by personnel not authorised by Tognana Porcellane S.p.A.;
• manipulations of components of the appliance or, where applicable, of the software;
• other circumstances that, in any case, cannot be traced back to manufacturing defects in the appliance. Tognana Porcellane S.p.A. declines all responsibility for any damage that may, directly or indirectly, result to people, property and pets as a result of failure to comply with all the requirements indicated in the specific instruction booklet and concerning especially the warnings regarding installation, use and maintenance of the device.

Further claims, in particular if they relate to claims, are excluded, unless the liability arises from express provision of law. At the end of the period of validity of this warranty, or for goods that are not covered by it, Tognana Porcellane S.p.A. remains available to the customer for any questions or information. Further information is available on the website: www.tognana.com.

Dear customer,

Fig. 1

PRODUCT CONFORMITY

Fig. 1

PRODUCT CONFORMITY

INCOMPATIBLE COOKWARE

Fig. 1

PRODUCT CONFORMITY

OPERATION

Fig. 1.

INCOMPATIBLE COOKWARE

• All pots/pans/cookware with a diameter smaller than 8 cm or larger than 26 cm, and all pots that do not have the induction cooking symbol ( ).
• Pots made of any non-magnetic metal, such as aluminum, copper, and stainless steel, as well as non-metallic materials (porcelain, glass, ceramic, or plastic), are not suitable.

Additionally, it is not recommended to use metal converter discs for standard pots, as these discs negate the economic advantage of induction and put the product under excessive strain.

OPERATION

1. Plug the device into a power outlet.
2. The device will emit an audible signal, and the display will show "---".
3. Place food in the cooking pot, then place the pot on the induction hob surface.
4. The cooking pot must be centered on the cooking zone.
5. Turn on the device by lightly pressing the "⏻" button, and the "on" status will be displayed.
6. Start the process by pressing the "W/°C°" button; the power indicator will appear on the screen at 1600 by default. Turn the knob to select the desired power (200 - 2000 W).
7. Press the "W/°C" button again to switch to the temperature indicator, set to a maximum value of 240 °C by default. Turn the knob to select the desired temperature (from 60 to 240 °C).
8. Press the "Timer" button to set the time: the display will show 0:00. Turn the knob to set the desired time (up to 4 hours).
9. At the end of the set time, the device will turn off, and the display will show "---"
10. To manually turn off the device, press and hold the "©" button.

IMPORTANT NOTE 📋: To extend the life of the device, it is advisable not to unplug it while the fan is running.

CAUTION – HOT SURFACE!: do not touch hot parts of the device.

LOCKING

To lock the keypad, press and hold the "TIMER" button during use. The display will show "Loc" indicating the lock. To unlock, press and hold the "TIMER" button again.

SAFETY MEASURES

The device automatically turns off if the cooking pot is not placed on the plate, or if it is removed, or if it is not suitable for induction cooking.

Figure 1.

Authorized service technician:

PSC PREŠEREN D.O.OLitijska cesta 12A1000 Ljubljana – SLO01-540-10-00,[e-mail] PON do PET med 7:00 in 17:00

PSC PREŠEREN D.O.O. PE MBPtujska cesta 92000 Maribor - SLO02-331-64-00, 031-620-900,[e-mail] PON do PET med 7:00 in 16:00

Dear customers,

Thank you for choosing our portable induction plate suitable for cooking and heating many foods with special pots and pans. The induction plate "induces" a magnetic field at the bottom of the cooking pot, creating a current in the pot that then heats the food. In this way, almost all of the absorbed electrical energy is transferred to the pot, minimizing heat loss. Tognana Porcellane S.p.A. will not be responsible for any damage that may occur, directly or indirectly, to persons, property, and pets as a result of failure to comply with all conditions set forth in the relevant "Instruction Manual" regarding the installation, use, and maintenance of the appliance.

SYMBOLS INDICATED IN THE INSTRUCTIONS/ ON THE DEVICE AND THEIR MEANING

	Ovaj simbol označava da je potrebno pozorno pročitati ova uputstva prije upotrebe. Obratite posebnu pozornost na sigurnosne informacije. Čuvajte ova uputstva na sigurnom mjestu jer su ona sastavni dio samog proizvoda.
	OPASNOST: riječ označava potencijalnu neizbježnu opasnost s visokim nivoom rizika koja, ako se ne izbjegne, ima veliku mogućnost da izazove ozbiljne ozljede ili smrt.
	UPOZORENJE: riječ označava potencijalnu neizbježnu opasnost sa srednjim nivoom rizika koja, ako se ne izbjegne, ima veliku mogućnost da izazove ozbiljne ozljede ili smrt
	OPREZ: riječ označava potencijalnu opasnost s niskim nivoom rizika koja, ako se ne izbjegne, mogla bi d dovede do manjih ili srednjih ozljeda.
	Klasa II: Ovaj simbol ukazuje da je uređaj električno izolovan, pa stoga ne treba utikač sa uzemljenjem.
	POZORNOST – VRUĆA POVRŠINA!: Simbol ukazuje na to da temperatura površine može postati opasno visoka i stoga treba izbjegavati direktan kontakt sa kožom i tkaninama/materijalima osjetljivim na toplotu.
	VAŽNA NAPOMENA: ove riječi označavaju korisne informacije za upotrebu proizvoda.Ovaj simbol koji se nalazi na proizvodu ili na njegovoj ambalaži označava da se uređaj, na kraju svog životnog vijeka, mora odložiti odvojeno od drugog otpada da bi se omogućio njegov ispravan tretman i recikliranje.
CE	Ovaj simbol pokazuje da je uređaj usklađen sa sigurnosnim zahtjevima kojeg predviđaju uredbe/direktive Evropske zajednice.

PRODUCT SAFETY

IMPORTANT NOTES ON CORRECT USE

Figure 1.

1. Special attention should be paid when there is hot oil or other hot liquids in the pot.

CORD AND PLUG

1. The power cord must be connected to an AC outlet (standard household current). Do not use other electrical outlets.
2. In case of incompatibility between the outlet and the plug, a qualified professional must replace the outlet with another of an appropriate type. The use of adapters, multiple outlets, and/or extension cords is not recommended. If their use is necessary, use only one or more adapters and extension cords that comply with current safety standards, taking care not to exceed the power limit marked on the adapter and/or extension cord.
3. Do not use the power cord if it is damaged.
4. Use only the power cord that is included in the

packaging.

1. To avoid electric shock, do not immerse the power cord in water or other liquids.
2. The power cord must be used in a dry and clean place. Use in wet or dirty environments may lead to risk of fire or electric shock.
3. Do not touch the cord or plug with wet hands.
4. Do not allow the cord to hang or fall from the work surface.
5. Be careful not to pull the power cord or step on it. Keep the cord away from heat sources, hot objects, or open flames.
6. Unplug the power cable before cleaning and when not in use. Turn off the device, then pull the plug out of the socket. Do not pull the cable; hold the plug with your hand when disconnecting.
7. Always connect the plug to the device first, then plug the cable into the electrical outlet. Make sure the cable is fully extended.
8. The cable must not be twisted or wrapped around the device.
9. Do not use the device if the power cable is damaged. Do not attempt to repair it yourself. Contact a service technician for repair/replacement if the product is under warranty, or contact customer support.
10. Do not use extension cords or devices with a timer.

PRODUCT COMPLIANCE

The manufacturer Tognana Porcellane S.p.A. declares that the product induction hob mod. IRIDEA complies with Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility.

The manufacturer Tognana Porcellane S.p.A. declares that the product induction hob mod. IRIDEA complies with Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits.

The manufacturer Tognana Porcellane S.p.A. declares that the product induction hob mod. IRIDEA complies with Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products.

The manufacturer Tognana Porcellane S.p.A. declares that the product induction hob mod. IRIDEA complies with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 and subsequent Commission Delegated Directive 2015/863 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

TECHNICAL SPECIFICATIONS

• Power: 2000 W
• Input voltage: 220 – 240 Vac ~ 50 – 60 Hz, 16 A
• Dimensions: 31 x 33 x 5 cm
• Net weight: 2050 g

PARTS DESCRIPTION

1 screen 2 timer/lock setting button 3 W/°C temperature regulator 4. ON/OFF button 5. function selection button 6 fan 7 tempered glass plate 8 air inlet

BEFORE FIRST USE

Figure 1.

UNSUITABLE COOKWARE

OPERATION