FSD-2500E - Speaker FoneStar - Free user manual and instructions
Find the device manual for free FSD-2500E FoneStar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | FoneStar |
| Model | FSD-2500E |
| Product type | Active speaker |
| Dimensions (W x H x D) | 25 x 15 x 20 cm |
| Weight | 1.2 kg |
| Output power | 50 W RMS |
| Frequency response | 50 Hz - 20 kHz |
| Impedance | 8 ohms |
| Power supply | Mains 220-240 V, 50/60 Hz |
| Connectivity | Bluetooth 5.0, Aux input 3.5 mm |
| Main functions | Wireless audio playback, volume control, auxiliary input |
| Care and cleaning | Clean with a soft dry cloth |
| Safety | Do not expose to water, do not open the device |
| Spare parts and repairability | Contact after-sales service |
| General information | Indoor use, operating temperature 0-35°C |
Frequently Asked Questions - FSD-2500E FoneStar
How to connect my phone via Bluetooth?
Activate Bluetooth on your phone, then put the speaker in pairing mode by holding down the Bluetooth button until the light flashes. Select 'FSD-2500E' from the list of available devices.
What to do if the sound is low or distorted?
Check that the volume of the speaker and your audio source is high enough. Make sure the source is not saturated and the speaker is not placed in a confined space. An obstacle between the speaker and the listener may also reduce sound quality.
How to clean the speaker?
Use a soft dry cloth to wipe the surface. Do not use chemical or abrasive products. Avoid letting moisture enter the openings.
Can I use the speaker outdoors?
The speaker is designed for indoor use. It is not waterproof. Avoid exposure to rain, humidity, or extreme temperatures.
What is the Bluetooth range?
The range is approximately 10 meters without obstacles. Walls and other obstacles may reduce this distance.
How to adjust the volume?
Use the volume knob on the speaker or the +/- buttons on your connected phone.
What to do if the speaker does not turn on?
Check that the power cable is properly plugged in and the mains outlet works. Try another cable if possible. If the problem persists, contact after-sales service.
Does the speaker have a built-in battery?
No, the speaker operates only on mains power via the provided power cable.
Can I connect multiple devices at the same time?
No, the speaker only supports one Bluetooth connection at a time. To change devices, disconnect the first and pair the new one.
How to reset the speaker?
Hold down the Bluetooth button for 10 seconds until the light flashes rapidly. This clears the paired device list and restores factory settings.
User questions about FSD-2500E FoneStar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual FSD-2500E - FoneStar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FSD-2500E by FoneStar.
USER MANUAL FSD-2500E FoneStar
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FoneStar
Model : FSD-2500E
Category : Speaker