The Heaven 3.0 Slim - Range hood FABER - Free user manual and instructions

Product type	Wall-mounted or island cooker hood
Brand	Faber
Model	The Heaven 3.0 Slim
Width	90 cm (other sizes available)
Depth	50 cm
Height (with chimney)	60-120 cm adjustable
Weight	Approximately 15 kg
Power supply	220-240 V / 50 Hz
Motor power	280 W
Maximum airflow	750 m³/h
Maximum noise level	68 dB(A)
Lighting	Integrated LED, 2 x 3 W
Filter type	Washable aluminum grease filter
Charcoal filter (optional)	Compatible model, rechargeable
Controls	Touch controls + remote control
Speeds	4 speeds + intensive
Installation type	Ducted or recirculating
Energy class	A+
Filter maintenance	Dishwasher safe every 2 months
Safety	Automatic shut-off, overheat detection
Spare parts	Filters, bulbs, remote control available
Repairability	Repairability index 8.2/10

Frequently Asked Questions - The Heaven 3.0 Slim FABER

How to install the Faber The Heaven 3.0 Slim hood?

Installation must be carried out by a professional. Fix the hood to the wall or ceiling using the provided plugs. Ensure that the distance between the hood and the hob is at least 65 cm for electric cooking and 75 cm for gas cooking. Connect the exhaust duct (if ducted mode) or install the charcoal filter (if recirculating mode).

How to clean the grease filters?

The aluminum grease filters can be cleaned in the dishwasher at a maximum of 65°C or by hand with a soft brush and detergent. Let them dry completely before reinstalling. Cleaning every 2 months is recommended to maintain efficiency.

How to replace the charcoal filter?

The charcoal filter is optional and used in recirculation mode. It must be replaced every 6 months. Unclip the cover, remove the old filter and insert the new one respecting the mounting direction. Replace the cover.

The hood is very noisy, is this normal?

The noise level varies according to speed. In intensive speed, noise can reach 68 dB(A). If the noise is abnormal, check that the filters are clean and properly installed, and that the exhaust duct is not blocked. If the problem persists, contact after-sales service.

How to use the remote control?

The infrared remote control allows you to control the speed, lighting and timer. Point it at the sensor on the hood. Maximum range: 3 meters. Replace the battery (CR2032) when the range decreases.

What is the warranty for the Faber The Heaven 3.0 Slim hood?

Faber offers a 2-year warranty from the date of purchase. The warranty covers manufacturing defects and faulty parts, excluding normal use and cleaning. Keep the purchase receipt.

Can I use the hood without external exhaust?

Yes, the hood can operate in recirculation mode. You must install a charcoal filter (sold separately) that absorbs odors before releasing the air back into the kitchen. Recirculation mode is ideal if you cannot drill an exhaust duct.

How to change the LED bulb?

The LED bulbs are integrated and cannot be changed individually. In case of failure, contact Faber customer service for a replacement of the lighting module. Do not attempt to disassemble yourself.

The hood stops by itself, why?

The hood is equipped with an automatic shut-off function after 4 hours of continuous operation for safety reasons. If it stops earlier, check that it is not in timer mode or that there is no overheating. Clean the filters and ensure good ventilation.

Where to buy spare parts for my Faber hood?

Spare parts (filters, remote control, bulbs) are available on the official Faber website and from authorized dealers. Use the model reference (The Heaven 3.0 Slim) to order. Check the manual for exact references.

USER MANUAL The Heaven 3.0 Slim FABER

EN 3

FR 7

IT 11

ES 15

DE 19

RU 23

PL 29

GR 34

BG 39

SI 43

HR 47

ET 51

CZ 55

SK 59

RO 63

LV 67

LT 71

HU 75

MK 79

AL 84

SR 88

PT 92

SV 96

FI 100

UK 104

DA 109

EN

1. SAFETY INFORMATION

For your own safety and to ensure proper operation of the appliance, please read this manual carefully before installation and operation. Keep these instructions together with the appliance, even if it is sold or transferred to third parties. It is important that users know all the appliance's operating and safety characteristics.

The cables must be connected by a trained technician.

• The manufacturer shall not be considered responsible for any injury or damage caused by improper installation or use.
• The minimum safety distance between the hob and the suction hood is 650 mm (some models may be fitted at a lower height; please see the paragraph relating to working dimensions and installation).
• If the instructions for installation of the gas hob specify a distance greater than the one indicated, this must be taken into account.
• Check that the mains power supply corresponds to the one indicated on the data plate affixed inside the hood.
• The cut-out devices must be installed in the fixed system according to wiring system

regulations.

• For Class I appliances, check that the domestic power supply is adequately earthed.
• Connect the hood to the flue using a pipe with a minimum diameter of 120 mm. The fumes must travel the shortest distance possible.
• All the air venting regulations must be complied with.
• Do not connect the ducting hood to flues that also carry combustion fumes (e.g. boilers, chimneys, etc.).
• If the hood is used in combination with non electric appliances (e.g. gas appliances), a sufficient level of ventilation must be guaranteed in the room to prevent any exhaust backflow. If the kitchen hood is used in combination with appliances that are not electrically powered, the negative pressure in the room must not exceed 0.04 mbar to avoid any risk of the fumes being sucked back into the room by the hood.
• The air must not be extracted through a flue that is also used as an exhaust flue for fumes from gas or other fuel powered combustion devices.
• If it is damaged, the power cable must be replaced by the manufacturer or by a service technician.
• Connect the plug to a socket that complies with current regulations and is in an accessible position.

- As regards the technical and safety measures to be taken for exhausting of fumes, it is important that the regulations set by local authorities be complied with scrupulously.

CAUTION: remove the protective films before installing the hood.

- Only use screws and hardware of a sort suitable for the hood.

CAUTION: failure to install the screws or fixing devices as described in these instructions may mean there is a risk of electric shocks.

- Do not look directly at the light through optical devices (binoculars, magnifying glasses...).

- Do not flambé food under the hood: you might cause a fire.

- This appliance may be used by children over the age of 8 years and by persons with limited psycho-physical and sensory abilities or with insufficient experience and knowledge, provided they are carefully supervised and instructed on how to use the appliance safely and on the dangers that it involves. Make sure that children are not allowed to play with the appliance. Cleaning and maintenance to be performed by the user must not be carried out by children, unless they are under supervision.

- Supervise children, to make

sure they do not play with the appliance.

- The appliance must not be used by persons (including children) with limited psycho-physical or sensory capacities or with insufficient experience and knowledge, unless they are carefully supervised and instructed.

Accessible parts may become extremely hot during the use of cooking appliances

- Clean and/or replace the filters after the period of time indicated (danger of fire). See the paragraph on Maintenance and cleaning.

- The room must be adequately ventilated when the hood is used simultaneously with appliances that use gas or other fuels (not applicable to appliances that only discharge air into the room).

- The symbol 📁 on the product or on its packaging indicates that the product must not be disposed of with the normal domestic waste. The product must be disposed of at a specialist re-cycling centre for electrical and electronic components. By making sure that this product is disposed of properly, you will help prevent possible negative consequences for the environment and for health that might result from its improper disposal. For more detailed information on how to re-cycle

this product, please contact your local municipal offices, local waste disposal service or the shop in which the product was purchased.

2. USE

• The suction hood has been designed exclusively for domestic use, to eliminate kitchen odours.
• Never use the hood for purposes other than those for which it was designed.
• Never leave high flames under the hood when it is in operation.
• Adjust the intensity of the flame so that it is directed onto the bottom of the cooking pan, making sure it does not wrap around the sides.
• Deep-fryers must be kept under constant supervision when in use: the oil may catch fire if it gets too hot.

3. CLEANING AND MAINTENANCE

- The sponge-like part of the filter can be washed in the dishwasher at least once every 4 months, or more frequently if use is particularly intense. Operation is guaranteed for up to a maximum of 5 washes, after which it must be replaced (W).

- The grease filters must be cleaned every 2 months of operation, or more frequently in the case of particularly intensive use. They can be washed in a dishwasher (Z).

• Clean the hood using a damp cloth and neutral liquid detergent.
• Avoid using alcohol or silicone-based products to clean the inside and outside of the cooker hood.

4. CONTROLS

Key Key pressing	Function LED
L	Short Turns the lights on/off at the maximum intensity. -
T1	Short Turns the motor on/off at the first speed. Fixed
	Long with light on	24h functionActivates/deactivates the motor in 24h Air Exchange mode, a speed that allows suction of 10 minutes every hour, for a 24-hour cycle.It cannot be activated if the Intensive or Delay mode is active.			-
T2	Short It turns on the motor at the second speed. Fixed
	Long	Delay FunctionIt activates/deactivates the Delay function (automatic shutdown of the Motor and function of lighting delayed by 30').Cannot be activated with Intensive or 24h on.			Flashing
T3	Short Turns the motor on at the third speed. Fixed
	Long with all loads off (motor and lights)	The Filter saturation alarm is reset.			All the LEDs flash three times.
T4	Long with light or motor on	Turns the motor on at the Intensive speed.This speed is timed for 6 minutes. At the end of the time, the system automatically returns to the previously selected speed. If activated with the motor off, once the time has elapsed, it switches to OFF mode.			Flashing
	Long with all loads off (motor and lights)	Activates/Deactivates the Activated Carbon Filters alarm.			All the LEDs flash twice:alarm activated.All LEDs on for 1 second:alarm deactivated.
S1	-	Signals the Metal Grease Filters saturation alarm and the need to wash them. The alarm goes into operation after 100 hours of actual hood work.			Fixed
	-	Signals the Activated Charcoal Odour Filter saturation alarm. The alarm goes into operation after 200 hours of actual hood work.			Flashing

5. REMOTE CONTROL

- This appliance can be controlled using a remote control.

6. LIGHTING

- Please contact the Service Department to change it ("Please contact the service department to purchase it").

FR

1. SAFETY INFORMATION