9012 ATT - Uncategorized Hazet - Free user manual and instructions
Find the device manual for free 9012 ATT Hazet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Torque Wrench |
| Model | 9012 ATT |
| Brand | Hazet |
| Drive Size | 1/2 inch square drive |
| Torque Range | 5–200 Nm (3.7–147 ft-lb) |
| Accuracy | ±2% of reading (clockwise), ±3% (counterclockwise) |
| Resolution | 0.1 Nm (0.1 ft-lb) |
| Units | Nm, ft-lb, in-lb, kgf-cm |
| Display | LCD with backlight |
| Functions | Peak hold, track, target torque, audible/visual alarm, memory |
| Power Supply | 2x AAA batteries (1.5V) |
| Battery Life | Approx. 50 hours of continuous use |
| Dimensions (L x H x W) | 520 x 75 x 40 mm |
| Weight | 1.2 kg (including batteries) |
| Material | Chrome-molybdenum steel head, aluminum handle |
| Calibration | Factory calibrated, recommended annual recalibration |
| Standards | ISO 6789, DIN EN 26789 |
| Operating Temperature | 0–40 °C (32–104 °F) |
| Storage Temperature | -10–60 °C (14–140 °F) |
| Waterproof Rating | IP20 (not for wet environments) |
| Included Accessories | Carrying case, calibration certificate, batteries |
Frequently Asked Questions - 9012 ATT Hazet
How do I switch between torque units on the Hazet 9012 ATT?
Press and hold the 'UNIT' button for 2 seconds to cycle through Nm, ft-lb, in-lb, and kgf-cm. The display will show the selected unit.
What should I do if the torque wrench shows an error code?
Refer to the manual for error code meanings. Common codes: Err1 (overload), Err2 (low battery). Replace batteries and avoid exceeding maximum torque.
How to replace the batteries in the Hazet 9012 ATT?
Open the battery compartment on the handle using a coin or screwdriver. Insert two AAA batteries with correct polarity. Close the cover securely.
Is the Hazet 9012 ATT waterproof?
No, it has an IP20 rating, meaning it is not protected against water. Avoid using in wet conditions and wipe clean with a dry cloth.
Can I use the torque wrench for counterclockwise (left-hand) threads?
Yes, but accuracy is ±3% for counterclockwise direction. Ensure the wrench is set to the correct direction using the direction switch.
How often should I calibrate the Hazet 9012 ATT?
Hazet recommends annual recalibration to maintain accuracy. Depending on usage, more frequent calibration may be needed.
What is the memory function for?
The memory function stores up to 50 torque values. Press 'MEM' to view saved measurements, and 'CLEAR' to delete them.
How do I set a target torque and use the alarm?
Press 'SET', input the desired torque value with arrow buttons, then press 'SET' again. The alarm sounds and LEDs flash when target is reached.
Why does the display show '0.0' when I apply torque?
Ensure the torque wrench is zeroed before use. Press the 'ZERO' button with no load applied. If issue persists, check battery or contact support.
Can I use a socket extension with this torque wrench?
Yes, but it may affect accuracy. Use only high-quality extensions and keep them as short as possible. Recalibrate if using long extensions.
User questions about 9012 ATT Hazet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 9012 ATT - Hazet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 9012 ATT by Hazet.
USER MANUAL 9012 ATT Hazet
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hazet
Model : 9012 ATT
Category : Uncategorized