BDM-2000 - Uncategorized NEP - Free user manual and instructions
Find the device manual for free BDM-2000 NEP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Bench Digital Multimeter |
| Model | BDM-2000 |
| Brand | NEP |
| Display | Large LCD with backlight |
| Measurement Functions | DC/AC voltage, DC/AC current, resistance, capacitance, frequency, duty cycle, diode test, continuity test |
| Dimensions (W x H x D) | 210 x 90 x 250 mm |
| Weight | 1.2 kg |
| Power Supply | AC adapter (included) or 4x AA batteries |
| Safety Rating | CAT II 1000V, CAT III 600V |
| Data Logging | Internal memory for up to 1000 readings |
| Interface | USB and RS232 |
| Accessories Included | Test leads, alligator clips, AC adapter, user manual |
| Cleaning | Wipe with dry cloth; do not use solvents |
| Storage Temperature | 0°C to 40°C |
| Operating Temperature | -10°C to 50°C |
| Warranty | 2 years limited |
| Spare Parts Availability | Test leads, fuses, battery compartment cover available from NEP service |
| Repairability | Designed for professional repair; service manual available |
Frequently Asked Questions - BDM-2000 NEP
How do I measure DC voltage with the BDM-2000?
Turn the rotary switch to DCV. Connect the black lead to COM and red lead to V/Ω/Hz. Touch probes to the circuit and read the display.
What is the maximum current I can measure?
For DC/AC current, use the 10A jack for currents up to 10A. For lower currents, use the mA jack (400mA max).
How do I replace the battery?
Turn off the meter and remove the test leads. Open the battery compartment on the bottom. Replace with 4 AA batteries observing polarity, then close compartment.
Why does the display show 'OL'?
'OL' means overload or out of range. Select a higher measurement range or check the input is within the meter's limits.
Can I measure frequency with this multimeter?
Yes, set the dial to Hz or select frequency mode in the mV or V ranges. The meter will measure frequency up to 10MHz.
How do I use the data logging function?
Press the LOG button to start logging. The meter records readings at intervals you set. Connect via USB to download data.
Is the BDM-2000 safe for automotive use?
Yes, it has CAT III rating suitable for automotive circuits. Always use proper personal protective equipment.
How do I clean the meter?
Wipe the exterior with a dry cloth. Do not use water, solvents, or abrasives. Keep the input terminals clean.
What type of fuse does the BDM-2000 use?
It uses a 1A/600V fast-blow fuse for mA/μA input and a 10A/600V fuse for the 10A input. Use only specified fuses.
Where can I download the user manual?
The manual is available for download on notice-facile.com in English and other languages. You can also request a translated version via email.
User questions about BDM-2000 NEP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual BDM-2000 - NEP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDM-2000 by NEP.
USER MANUAL BDM-2000 NEP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NEP
Model : BDM-2000
Category : Uncategorized