Frog - Coffee machine Didiesse - Free user manual and instructions
Find the device manual for free Frog Didiesse in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Espresso Coffee Machine |
| Brand | Didiesse |
| Model | Frog |
| Dimensions (W x H x D) | 25 x 30 x 40 cm |
| Weight | 8 kg |
| Power Supply | 220-240 V, 50/60 Hz |
| Power Consumption | 1350 W |
| Water Tank Capacity | 1.5 L |
| Bean Hopper Capacity | 250 g |
| Pump Pressure | 15 bar |
| Main Functions | Espresso, steam wand for cappuccino, hot water dispenser |
| Controls | Electronic panel with buttons and rotary dial |
| Grinder Type | Built-in conical burr grinder |
| Grind Settings | Adjustable, 15 levels |
| Brewing Temperature | Adjustable via PID controller |
| Pre-Infusion | Yes, programmable |
| Cleaning and Maintenance | Descaling program, removable drip tray and water tank |
| Safety Features | Auto shut-off, child lock, overheat protection |
| Spare Parts and Repairability | Serviceable by authorized centers; spare parts available for 10 years |
| Warranty | 2 years |
| Manual Languages | English, Italian, and more (60 pages) |
Frequently Asked Questions - Frog Didiesse
How do I descale the Frog espresso machine?
Use a descaling solution suitable for automatic espresso machines. Fill the water tank with descaling mix, activate the descaling program via the menu, and follow the on-screen instructions. Rinse thoroughly after.
What should I do if the machine does not brew coffee?
Check that the water tank is filled and correctly inserted, the bean hopper has beans, and the drip tray is empty. Also ensure the brew group is properly locked. If the issue persists, run a cleaning cycle.
How do I adjust the grind size?
Turn the grind adjustment dial inside the bean hopper. For finer grind (espresso), turn clockwise; for coarser grind (filter coffee), turn counterclockwise. Adjust only while the grinder is running to avoid damage.
Can I use pre-ground coffee instead of beans?
Yes, the Frog has a bypass doser. Open the front flap and add one scoop of pre-ground coffee into the bypass chute. The machine will brew using that dose instead of grinding fresh beans.
How often should I clean the brew group?
Clean the brew group weekly under running water. Remove it by opening the side door, rinse with warm water, and let it dry. Do not use detergent. Lubricate the group every 3 months with food-grade grease.
Why is the coffee not hot enough?
Ensure the machine is fully preheated (about 10 minutes). You can increase the brew temperature in the settings menu. Also preheat your cup by rinsing it with hot water from the steam wand.
How do I make a cappuccino?
Brew a shot of espresso into a cup. Then use the steam wand to froth cold milk. Submerge the tip just below the surface, open the steam valve, and move the pitcher in a circular motion until microfoam forms.
What does the blinking red light mean?
A blinking red light typically indicates a need for descaling or a general maintenance alert. Check the display for a specific code and refer to the manual for troubleshooting steps.
Can I adjust the water hardness setting?
Yes, access the menu and select 'Water Hardness'. Use a test strip to measure your water hardness and set the appropriate level (1-4). This optimizes descaling intervals.
How do I replace the water filter?
First, rinse the new filter under cold water. Insert it into the water tank as indicated. Then activate the filter replacement program via the menu to prime it. Replace every 2-3 months.
User questions about Frog Didiesse
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Coffee machine in PDF format for free! Find your manual Frog - Didiesse and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Frog by Didiesse.