Vapour Plus - Effect machine Rosco - Free user manual and instructions
Find the device manual for free Vapour Plus Rosco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fog Machine |
| Brand | Rosco |
| Model | Vapour Plus |
| Dimensions (L x W x H) | 18 x 10 x 12 inches (45.7 x 25.4 x 30.5 cm) |
| Weight | 12.5 lbs (5.7 kg) |
| Power Consumption | 1200 W |
| Voltage | 120 V AC, 60 Hz (for NA); 230 V AC, 50 Hz (for EU) |
| Fluid Capacity | 2.5 L |
| Fluid Type | Water-based fog fluid |
| Output (approx.) | Up to 12,000 cubic feet per minute |
| Heating Time | Approximately 3 minutes |
| Control Method | Manual, remote control, DMX (optional) |
| Remote Type | Wired or wireless (depending on model) |
| DMX Channels | 2 (fog output, fan speed) |
| Housing Material | Steel and high-impact plastic |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Maintenance | Clean heating element after every 40 hours of use; use Rosco cleaning fluid |
| Safety Features | Thermal fuse, auto shut-off when fluid empty, low-fluid indicator |
| Spare Parts Available | Heater block, pump, fan, fuse, remote control |
| Repairability | Serviceable by qualified technician; user-replaceable fuse and filter |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - Vapour Plus Rosco
How do I turn on the Rosco Vapour Plus fog machine?
Ensure the machine is filled with fog fluid and plugged into a power outlet. Press the power switch on the rear panel. The machine will heat up; the green LED will illuminate when ready. Use the remote or manual button to output fog.
What type of fog fluid should I use?
Only use water-based fog fluid specifically designed for Rosco machines, such as Rosco Fog Fluid. Using other fluids may damage the machine and void the warranty.
How often should I clean the Vapour Plus?
Clean the heating element and pump after every 40 hours of use, or whenever you notice reduced output or sputtering. Use Rosco Cleaning Fluid to flush the system.
Can I use the Vapour Plus outdoors?
Yes, but avoid windy conditions that dissipate the fog quickly. Also protect the machine from rain or moisture, as it is not fully weatherproof.
What does the DMX control do?
The DMX feature allows you to control fog output and fan speed remotely from a lighting console. Use a standard DMX cable to connect, and set the DMX address on the machine. It uses 2 channels: channel 1 for fog volume, channel 2 for fan speed.
My Vapour Plus is not producing fog; what should I check?
First, ensure the machine is turned on and has reached operating temperature (green LED on). Check the fluid level; refill if empty. Verify the remote is connected properly. If still no output, inspect the fuse and replace if blown. For persistent issues, contact Rosco support.
Is the Vapour Plus safe to use near people?
Yes, when used with water-based fog fluid. However, avoid directing fog directly at faces, and ensure adequate ventilation. The fog may cause slipping on wet surfaces; clean up any condensation.
How do I store the machine when not in use?
First, run cleaning fluid through the system to prevent residue buildup. Let it cool completely. Empty any remaining fluid from the tank. Store in a cool, dry place away from dust.
What spare parts are available for the Vapour Plus?
Commonly available spare parts include heater block, pump, fan, fuse, and remote control. Contact Rosco or authorized dealers for purchase.
Why does my Vapour Plus shut off during use?
This may occur if the fluid runs out; the machine has an auto shut-off feature. Also, if the internal temperature exceeds safe limits, the thermal fuse will cut power. Allow the machine to cool and check fluid level before restarting.
User questions about Vapour Plus Rosco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual Vapour Plus - Rosco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vapour Plus by Rosco.