ebm-papst

8412 NLE - Fan ebm-papst - Free user manual and instructions

Find the device manual for free 8412 NLE ebm-papst in PDF.

📄 4 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ebm-papst 8412 NLE - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Axial Fan
Brand ebm-papst
Model 8412 NLE
Dimensions (L x W x H) 80 mm x 80 mm x 25 mm
Weight 0.2 kg
Rated Voltage 12 V DC
Operating Voltage Range 8 to 14 V DC
Power Consumption 2.5 W
Current Draw 0.21 A
Airflow 60 m³/h
Noise Level 32 dBA
Speed 3500 RPM
Bearing Type Ball Bearing
Connector 2-wire, AWG 22, 250 mm length
Polarity Protection Yes, built-in
Housing Material Die-cast aluminum
Impeller Material Plastic (PA)
IP Rating IP20
Operating Temperature Range -20 °C to +60 °C
Lifespan 50,000 hours at 40 °C

Frequently Asked Questions - 8412 NLE ebm-papst

What is the voltage requirement for the ebm-papst 8412 NLE fan?
The 8412 NLE fan requires a 12 V DC power supply. It can operate within a range of 8 to 14 V DC.
How do I clean the fan?
Disconnect the fan from power. Use a soft, dry cloth or a brush to gently remove dust from the blades and housing. Avoid using liquids or compressed air that may damage the bearings.
What are the dimensions of the 8412 NLE fan?
The fan has standard dimensions of 80 mm x 80 mm x 25 mm (length x width x height), suitable for most 80mm fan mounts.
Can I use this fan in a 12V computer case?
Yes, the 8412 NLE is an axial fan designed for 12V DC operation, making it suitable for cooling electronic equipment like computer cases, provided the mounting holes match (72 mm spacing).
Is the fan noisy?
The noise level is approximately 32 dBA, which is relatively quiet. For silent operation, consider using a fan speed controller or a resistor to lower the RPM.
How do I connect the fan to a power source?
The fan comes with a 2-wire cable (red positive, black negative). Connect red to +12V and black to ground (GND). Ensure correct polarity to avoid damage; the fan has built-in polarity protection.
What type of bearing does this fan use?
The 8412 NLE uses ball bearings, which provide longer lifespan (up to 50,000 hours at 40°C) and better reliability compared to sleeve bearings.
Can I replace the fan blade if it gets damaged?
The impeller is not replaceable separately. If the blade is damaged, the entire fan unit should be replaced. Spare parts are available through ebm-papst authorized distributors.
What is the maximum operating temperature?
The fan can operate in ambient temperatures from -20 °C to +60 °C. Exceeding this range may reduce the lifespan or cause failure.
Is the fan suitable for outdoor use?
No, the IP rating is IP20, meaning it is only protected against solid objects larger than 12.5 mm and not against water. It should be used indoors in dry environments.

User questions about 8412 NLE ebm-papst

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Fan in PDF format for free! Find your manual 8412 NLE - ebm-papst and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 8412 NLE by ebm-papst.

USER MANUAL 8412 NLE ebm-papst

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ebm-papst

Model : 8412 NLE

Category : Fan