H3DPS4866TAMB-80 - Washing machine HOOVER - Free user manual and instructions
Find the device manual for free H3DPS4866TAMB-80 HOOVER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Washing machine |
| Brand | Hoover |
| Model | H3DPS4866TAMB-80 |
| Energy Class | A |
| Capacity (kg) | 8 kg |
| Spin Speed (rpm) | 1400 rpm |
| Dimensions (H x W x D) | 85 x 60 x 55 cm |
| Weight | 67 kg |
| Power Consumption (kWh/cycle) | 0.99 kWh |
| Water Consumption (L/cycle) | 52 L |
| Noise Level (dB(A)) | 52 dB (wash) / 76 dB (spin) |
| Drum Type | Stainless steel |
| Motor Type | Inverter motor |
| Steam Function | Yes |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Display | LED |
| Repair Index | 8.5 / 10 |
| Spare Parts Availability | 7+ years |
| Monthly Energy Consumption | 30 kWh |
| Annual Water Consumption | 10,400 L |
| Recommended Detergent | High efficiency (HE) |
Frequently Asked Questions - H3DPS4866TAMB-80 HOOVER
How to install the Hoover H3DPS4866TAMB-80 washing machine?
Remove all packaging, level the machine using the adjustable feet, connect the water inlet hose to a cold water tap, insert the drain hose into a standpipe or sink, and plug into a grounded outlet. Refer to the manual for detailed steps.
What does error code 'E10' mean on my Hoover washing machine?
Error E10 indicates a water filling issue. Check if the water tap is open, the inlet hose is kinked, or the filters are blocked. Clean the inlet hose filter and ensure water pressure is adequate.
How to clean the detergent drawer?
Press the release button to remove the drawer, rinse under warm water, and use a small brush to clean the compartments. Wipe dry and reinsert. Clean every 2-3 months to prevent buildup.
Can I use bleach in this washing machine?
Yes, but pour bleach into the designated compartment (usually marked with a bleach symbol) and avoid overfilling. Do not mix bleach with other detergents.
How to reset the Hoover H3DPS4866TAMB-80?
Unplug the machine for 10 minutes, then plug it back in. If the issue persists, press and hold the 'Start/Pause' button for 5 seconds to reset the cycle.
What is the maximum spin speed of this model?
The maximum spin speed is 1400 rpm. You can adjust it to lower speeds (e.g., 800 rpm) for delicate fabrics.
How to clean the drain pump filter?
Open the lower cover, place a container under the filter, unscrew and remove the filter. Clean any debris, replace the filter and tighten, then close the cover. Do this every 3-6 months.
Why is my washing machine vibrating excessively?
Check that the machine is level and all transport bolts are removed. An unbalanced load can also cause vibration; redistribute clothes evenly.
How to use the steam function?
Select the steam cycle (e.g., Steam Refresh) from the program selector. The machine will inject steam to reduce wrinkles and refresh fabrics. Do not overfill the drum.
What spare parts are available for this model?
Common spare parts include drum paddles, door seal, inlet valve, drain pump, and control board. These are available through Hoover service centers and online stores for up to 7 years after purchase.
User questions about H3DPS4866TAMB-80 HOOVER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual H3DPS4866TAMB-80 - HOOVER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. H3DPS4866TAMB-80 by HOOVER.