SEM5000 DUAL - Energy meter VOLTCRAFT - Free user manual and instructions
Find the device manual for free SEM5000 DUAL VOLTCRAFT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Dual Energy Meter (Power Meter) |
| Brand | Voltcraft |
| Model | SEM5000 DUAL |
| Display | Backlit LCD, 5-digit |
| Measurement Functions | Energy (kWh), Power (W), Voltage (V), Current (A), Frequency (Hz), Power Factor, Cost |
| Rated Voltage | 230 V AC, 50/60 Hz |
| Max Current | 16 A (continuous), 20 A (peak) |
| Power Consumption | < 1 W (standby), < 0.5 W (display off) |
| Accuracy | ±1% for energy, ±2% for power |
| Memory | Non-volatile storage for accumulated energy and cost |
| Tariff Settings | Up to 3 tariffs with adjustable price per kWh |
| Overload Protection | Fuse (internal, replaceable) |
| Safety Category | CAT II 300 V |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | ≤80% RH (non-condensing) |
| Dimensions | 150 x 70 x 40 mm |
| Weight | 200 g (approx.) |
| Power Supply | 2 x AAA batteries (1.5 V) or USB power (5 V DC) |
| Battery Life | Approx. 1 year with daily use |
| Maintenance | Clean with a dry, soft cloth; avoid liquids |
| Spare Parts | Fuse 20 A/250 V (internal), batteries (AAA) |
| Repairability | Designed for professional repair; no user-serviceable parts except fuse and batteries |
| Warranty | 2 years (if registered) |
| Included Accessories | User manual, 2 x AAA batteries (optional) |
Frequently Asked Questions - SEM5000 DUAL VOLTCRAFT
How do I reset the energy meter?
Press and hold the RESET button for 3 seconds to clear the accumulated energy and cost data. Note that this cannot be undone.
Can I set different electricity tariffs?
Yes, you can program up to three tariffs (T1, T2, T3) with custom prices per kWh via the SET button menu.
How do I replace the batteries?
Open the battery compartment on the back, remove old batteries, and insert two new AAA 1.5 V batteries. The meter retains stored data.
Is the meter safe to use in wet areas?
No, the meter is not waterproof. Use only in dry indoor environments. Keep away from moisture.
What is the maximum load I can measure?
Continuous load up to 16 A (about 3680 W at 230 V). Peak load up to 20 A for short periods.
Can I use the meter with a USB power adapter instead of batteries?
Yes, the meter can be powered via the micro-USB port (5 V DC, 500 mA). Batteries are optional when using USB.
How accurate is the energy measurement?
Energy accuracy is within ±1% for typical loads. Power measurement accuracy is ±2%.
Does the meter save data when power is lost?
Yes, the meter has non-volatile memory that retains accumulated energy and cost data even without batteries or USB power.
How do I change the displayed unit from kWh to cost?
Repeatedly press the MODE button to cycle through displays: Energy (kWh), Power (W), Voltage (V), Current (A), Frequency (Hz), Power Factor, and Cost.
What does the backlight button do?
Pressing the LIGHT button toggles the backlight on/off. It stays on for 30 seconds to save battery.
User questions about SEM5000 DUAL VOLTCRAFT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Energy meter in PDF format for free! Find your manual SEM5000 DUAL - VOLTCRAFT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SEM5000 DUAL by VOLTCRAFT.
USER MANUAL SEM5000 DUAL VOLTCRAFT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : VOLTCRAFT
Model : SEM5000 DUAL
Category : Energy meter