EX2200-C - Switch Juniper - Free user manual and instructions
Find the device manual for free EX2200-C Juniper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ethernet Switch |
| Model | EX2200-C |
| Brand | Juniper Networks |
| Port Configuration | 12 x 10/100/1000BASE-T + 4 x Gigabit SFP (uplink) |
| PoE Support | Yes, 802.3af/at with up to 124W total budget |
| Form Factor | Compact desktop or wall-mountable |
| Dimensions (W x D x H) | 10.2 x 8.5 x 1.7 in (25.9 x 21.6 x 4.3 cm) |
| Weight | 2.9 lb (1.3 kg) |
| Power Supply | Internal AC power supply, 100-240V AC, 50-60 Hz |
| Power Consumption | 65W (maximum with PoE) |
| Switching Capacity | 32 Gbps |
| Forwarding Rate | 23.8 Mpps |
| VLAN Support | Up to 1024 VLANs, 802.1Q tagging |
| Layer 2 Features | STP, RSTP, MSTP, IGMP snooping, Link Aggregation (LAG) |
| Management | CLI via console, SSH, Telnet, SNMP, Web interface |
| Cooling | Fanless operation |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Humidity | 5% to 90% non-condensing |
| Mounting Options | Desktop, wall mount, or rack-mount (bracket sold separately) |
| Spare Parts and Reparability | Contact Juniper support; no user-replaceable parts |
Frequently Asked Questions - EX2200-C Juniper
How do I access the EX2200-C management interface?
You can access the switch via the console port (RJ-45 or USB console cable) using a terminal emulator, or over the network via SSH or Telnet after configuring an IP address. The default IP is 192.168.1.1 if not changed.
Does the EX2200-C support PoE?
Yes, the EX2200-C supports PoE+ (802.3at) on all 12 copper ports with a total power budget of up to 124W. You can power devices like IP phones, cameras, and wireless access points.
How many VLANs can I create on the EX2200-C?
You can create up to 1024 VLANs with 802.1Q tagging. The switch supports VLAN trunking and port-based VLANs.
What is the default username and password?
The default login is root with no password (blank). It is highly recommended to set a strong password upon initial configuration.
Can I use the EX2200-C as a stackable switch?
No, the EX2200-C is a standalone switch and does not support stacking. For stacking, consider Juniper EX2300 or EX3400 series.
How do I reset the EX2200-C to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until the system lights blink. Alternatively, use the CLI command:
request system zeroize.What types of SFP modules are supported?
The switch supports Juniper-validated SFP modules for 1000BASE-SX, 1000BASE-LX, and 1000BASE-T optics. Third-party SFPs may work but are not officially guaranteed.
Does the EX2200-C support Jumbo frames?
Yes, it supports jumbo frames up to 9216 bytes on all ports. You can enable it per port or globally via the CLI.
How do I update the firmware on the EX2200-C?
Download the latest Junos OS image from Juniper's support site, then use the CLI command
request system software add to install it. Reboot to complete the update.Is the EX2200-C silent?
Yes, the EX2200-C is fanless, making it suitable for quiet environments like offices or classrooms. Ensure proper ventilation to avoid overheating.
User questions about EX2200-C Juniper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual EX2200-C - Juniper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EX2200-C by Juniper.
USER MANUAL EX2200-C Juniper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Juniper
Model : EX2200-C
Category : Switch