MX104 - Router Juniper - Free user manual and instructions
Find the device manual for free MX104 Juniper in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Edge Router |
| Brand | Juniper Networks |
| Model | MX104 |
| Dimensions (H x W x D) | 1.72 x 17.36 x 8.7 inches (4.4 x 44.1 x 22.1 cm) |
| Weight | 12.1 lb (5.5 kg) |
| Power Supply | AC or DC, 150W typical |
| Cooling | Front-to-back airflow, redundant fans |
| Operating System | Juniper Junos OS |
| Ports | 8x 10GbE SFP+, 4x 1GbE SFP, 2x 10GbE XFP |
| Routing Protocols | BGP, OSPF, IS-IS, MPLS, LDP, RSVP |
| VPN Support | L2VPN, L3VPN, VPLS, GRE, IPsec |
| Redundancy | Redundant power supplies and fans |
| Management | CLI, J-Web, SNMP, NETCONF |
| Compliance | NEBS Level 3, ETSI, FCC, CE |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 5% to 85% non-condensing |
| Maintenance | Regular software updates and air filter cleaning |
| Repairability | Field-replaceable power supplies, fans, and interface modules |
| Safety Warnings | ESD precautions, proper grounding, avoid liquid exposure |
Frequently Asked Questions - MX104 Juniper
How do I perform an initial configuration on the Juniper MX104?
Connect to the console port using a serial cable, power on the device, and use the CLI to set the hostname, IP addresses, and basic routing using Junos OS commands. Refer to the Juniper MX104 Quick Start Guide for step-by-step instructions.
What are the power requirements for the MX104?
The MX104 supports AC or DC power supplies. For AC, it requires 100-240 VAC, 50-60 Hz, with a typical power consumption of 150W. Ensure proper circuit capacity and use a surge protector.
Can I install the MX104 in a standard 19-inch rack?
Yes, the MX104 is designed for 19-inch racks with mounting brackets. It is 1U high and can be installed using the provided rack-mounting kit. Ensure adequate airflow and clearance.
How do I upgrade the Junos OS software on the MX104?
Download the appropriate Junos OS image from the Juniper Support Portal. Connect to the device via SSH or console, use the 'request system software add' command to install the upgrade, and reboot the router.
What types of SFP modules are supported on the MX104?
The MX104 supports SFP and SFP+ modules for 1GbE and 10GbE connections, as well as XFP modules for 10GbE. Use only Juniper-qualified transceivers for compatibility and performance.
How can I reset the MX104 to factory default settings?
Issue the 'load factory-default' command in the CLI to reset the configuration. Then set the root password and commit the changes. Alternatively, press the reset button on the front panel during boot.
Is the MX104 fan-replaceable?
Yes, the MX104 has field-replaceable fan modules. You can swap them without powering down the router (hot-swappable). Ensure the replacement fan is compatible and secured properly.
What should I do if the router does not boot?
Check power connections and the status LEDs. Ensure the power supply is working. If still not booting, try removing all modules and reseating them. Contact Juniper support if the issue persists.
How do I configure a BGP session on the MX104?
Use the CLI to define a BGP group, set a peer AS number, and configure neighbor IP addresses. Example: 'set routing-options autonomous-system 65000', 'set protocols bgp group IBGP neighbor 10.0.0.1 peer-as 65000'.
Where can I find the latest documentation and support for the MX104?
Visit the Juniper Networks support website at https://support.juniper.net/. You can find manuals, software updates, knowledge base articles, and community forums for the MX104.
User questions about MX104 Juniper
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual MX104 - Juniper and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX104 by Juniper.
USER MANUAL MX104 Juniper
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Juniper
Model : MX104
Category : Router