JT-HD35 - Multimeter Joy-It - Free user manual and instructions
Find the device manual for free JT-HD35 Joy-It in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Model | JT-HD35 |
| Brand | Joy-It |
| Power Supply | 9V battery (6F22 or equivalent) |
| Display | LCD, 3.5 digit (2000 counts) |
| DC Voltage Range | 200mV - 600V |
| AC Voltage Range | 200V - 600V |
| DC Current Range | 200µA - 10A |
| Resistance Range | 200Ω - 2000kΩ (2MΩ) |
| Continuity Test | Audible buzzer below ~30Ω |
| Diode Test | Yes, forward voltage measurement |
| Safety Rating | CAT II 600V |
| Dimensions (approx.) | 126 x 70 x 27 mm |
| Weight (without battery) | Approx. 170 g |
| Accessories Included | Test leads, 9V battery, user manual |
| Operating Temperature | 0°C - 40°C |
| Storage Temperature | -10°C - 50°C |
| Cleaning | Wipe with a soft, dry cloth. Do not use solvents. |
| Safety Precautions | Disconnect test leads before changing battery or fuse. Use correct range and category. |
| Spare Parts Available | Test leads, 9V battery, fuse (if applicable) |
| Manual | Downloadable PDF from Joy-It website |
Frequently Asked Questions - JT-HD35 Joy-It
How do I measure DC voltage with the JT-HD35?
Turn the rotary switch to the DCV range (e.g., 200mV, 2V, 20V, 200V, or 600V). Connect the black test lead to COM and red to V/Ω/μA. Touch probes to the circuit in parallel and read the display. Start with the highest range if unsure.
Can I measure AC voltage with this multimeter?
Yes, set the rotary switch to ACV (200V or 600V only). The JT-HD35 measures AC voltage up to 600V. It is not true RMS, so it works best for sine waves.
How do I test continuity?
Turn the switch to the continuity/diode position (usually marked with a diode symbol and/or sound wave). Connect leads: black to COM, red to V/Ω/μA. Touch the two ends of the circuit. A buzzer will sound if the resistance is below about 30Ω.
How do I replace the battery?
Turn off the meter and disconnect test leads. Remove the screw on the back cover and lift off the battery compartment. Replace the 9V battery (6F22 type) with a new one, ensuring correct polarity. Close the cover and secure the screw.
What safety precautions should I take?
Always start with the highest range when measuring unknown voltages. Do not exceed 600V DC or AC. Use the correct input jacks and never connect the meter to a live circuit with the rotary switch set to resistance or continuity. Disconnect test leads before changing battery or fuse.
Why does the display show '1' or 'OL'?
'1' or 'OL' (overload) indicates the measurement exceeds the selected range. Switch to a higher range. For voltage, if it still shows OL, the voltage may be above 600V, which the meter cannot measure safely.
How do I measure resistance?
Turn the switch to the Ω position (200, 2k, 20k, 200k, or 2000k). Ensure the circuit is de-energized and no parallel paths. Connect leads: black to COM, red to V/Ω/μA. Touch probes across the resistor and read the value.
What is the diode test feature?
Set the switch to the diode/continuity position (diode symbol). Connect the red lead to the anode and black to cathode of the diode. The display shows the forward voltage drop. A good silicon diode reads about 0.5-0.8V; a shorted diode reads near 0V; an open diode shows OL.
The meter does not turn on. What could be wrong?
First, check if the rotary switch is correctly set (not off). If still off, the battery may be depleted or installed incorrectly. Open the battery compartment, check polarity, and replace if necessary. Also check for corrosion on battery contacts.
What spare parts are available for the JT-HD35?
Common spare parts include test leads (standard banana plug), 9V battery (6F22), and a fuse (if your model has a current range with a fuse; often a 10A fuse for high current). These can be purchased from electronics stores or online.
User questions about JT-HD35 Joy-It
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Multimeter in PDF format for free! Find your manual JT-HD35 - Joy-It and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JT-HD35 by Joy-It.
USER MANUAL JT-HD35 Joy-It
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Joy-It
Model : JT-HD35
Category : Multimeter