Emser Inhalator Pro - Inhaler EMS - Free user manual and instructions
Find the device manual for free Emser Inhalator Pro EMS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Compressor inhaler |
| Brand | EMS |
| Model | Emser Inhalator Pro |
| Dimensions (L x W x H) | 20 x 15 x 10 cm |
| Weight | 1.5 kg |
| Power supply | 230 V / 50 Hz |
| Power | 150 W |
| Medication reservoir capacity | 10 ml |
| Nebulization rate | 0.3 ml/min |
| Particle size (MMAD) | 3.5 µm |
| Noise level | < 60 dB |
| Main functions | Effective nebulization for airways, automatic shut-off |
| Included accessories | Mouthpiece, adult mask, child mask, replacement filter |
| Maintenance and cleaning | Clean after each use: disassemble and rinse with warm water, disinfect once a week |
| Safety | Automatic shut-off, overheat protection, CE certification |
| Spare parts and repairability | Nebulizer, gasket, filter, masks available separately |
| General information | For inhalation of saline or prescribed medication solutions |
Frequently Asked Questions - Emser Inhalator Pro EMS
How to prepare the inhaler for first use?
Before first use, clean all removable parts with warm water and mild soap. Rinse thoroughly and let air dry. Insert the filter into the designated compartment.
What types of liquids can I use in the Emser Inhalator Pro?
Use only solutions prescribed by your doctor, such as isotonic saline solutions or inhalation medications. Never use essential oils or viscous liquids.
How to clean the device after each session?
Disassemble the reservoir, mouthpiece, and mask. Rinse them with warm water without detergent. Dry carefully with a lint-free cloth. The compressor should be wiped with a damp cloth.
How often should the filter be changed?
The filter should be replaced every 3 months or sooner if visibly dirty. A clogged filter reduces treatment effectiveness.
Why does the device not turn on?
Check that the power cord is properly plugged in and the outlet works. Make sure the reservoir is properly engaged, as a safety sensor prevents startup if the cup is not in place.
Can I use the inhaler with just one mask or mouthpiece?
Yes, you can choose the mouthpiece for direct administration or the mask (adult or child) for broader inhalation. The accessories are interchangeable.
How long does a typical inhalation session last?
Duration depends on the volume of solution used. For 10 ml, allow about 20 to 30 minutes. The device automatically stops when the reservoir is empty.
Is the device suitable for children?
Yes, it comes with a child mask and can be used under supervision. Consult a doctor for dosage and treatment duration.
What to do if the vapor flow is weak?
Check that the filter is not clogged, the cup is clean, and the sealing gasket is properly positioned. If the problem persists, contact customer service.
Where can I buy spare parts?
Spare parts (nebulizer, masks, filters) are available on the official EMS website or from authorized dealers. Use only original parts.
User questions about Emser Inhalator Pro EMS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Inhaler in PDF format for free! Find your manual Emser Inhalator Pro - EMS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Emser Inhalator Pro by EMS.
USER MANUAL Emser Inhalator Pro EMS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : EMS
Model : Emser Inhalator Pro
Category : Inhaler