EB221S - Blower Shindaiwa - Free user manual and instructions
Find the device manual for free EB221S Shindaiwa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Blower |
| Brand | Shindaiwa |
| Model | EB221S |
| Category | Portable gas blower |
| Engine | 2-stroke, single cylinder |
| Displacement | 21.2 cm³ |
| Max power | 0.7 kW |
| Idle speed | 2 500 rpm |
| Max speed | 7 500 rpm |
| Max air flow | 10.5 m³/min |
| Max air speed | 67 m/s |
| Fuel tank capacity | 0.4 L |
| Fuel type | Gasoline-oil mixture 50:1 |
| Weight (without fuel) | 4.5 kg |
| Dimensions (L x W x H) | 350 x 250 x 300 mm |
| Sound level (LwA) | 94 dB(A) |
| Vibration (front hand) | 3.5 m/s² |
| Ignition | Electronic CDI |
| Spark plug | NGK BPMR7A |
| Maintenance | Air filter cleaning, cooling fins and spark arrestor |
| Spare parts | Filter, spark plug, carburetor, etc. available |
Frequently Asked Questions - EB221S Shindaiwa
What fuel to use for the Shindaiwa EB221S?
Use a mixture of unleaded gasoline (95 or 98) and 2-stroke engine oil at a 50:1 ratio. Do not use gasoline containing more than 10% ethanol.
How to start the blower?
Set the switch to ON, close the choke (lever up), set the throttle trigger to half throttle, press the primer bulb 5 times, then pull the starter cord slowly until resistance is felt, then pull briskly. After starting, open the choke.
How to adjust the carburetor idle?
Locate the idle screw (marked 'L' or 'T'). Turn it to obtain a stable idle of about 2500 rpm. The speed should not engage the clutch. If necessary, also adjust the low-speed mixture screw (L).
When and how to clean the air filter?
Clean the air filter every 10 hours of use. Remove the cover, take out the filter, wash it in soapy water, rinse and dry completely. Lightly soak it with filter oil before reinstalling.
How to prevent vibration damage?
Wear anti-vibration gloves and take regular breaks. Do not grip the tool too tightly. Ensure the anti-vibration mounts are in good condition.
What to do if the blower does not start?
Check the spark plug (replace if dirty), the air filter (clean it), the fuel (presence and quality) and the spark (place the plug on the cylinder and check while pulling). If nothing works, consult an authorized repairer.
How to store the unit in winter?
Empty the tank and run the engine until it stops to empty the carburetor. Clean the unit. Tighten the screws. Store it in a dry, frost-free place.
What oil to use for the mixture?
Use a high quality 2-stroke engine oil, certified ISO-L-EGD or JASO FD. Respect the 50:1 ratio (2% oil).
How to clean the spark arrestor?
Let the engine cool down. Remove the spark arrestor (located on the muffler). Brush it with a wire brush. Replace it if damaged or clogged.
What is the warranty period?
Subject to normal use and proper maintenance, the warranty is 2 years for private individuals. Keep the invoice and warranty certificate.
User questions about EB221S Shindaiwa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Blower in PDF format for free! Find your manual EB221S - Shindaiwa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EB221S by Shindaiwa.