TDR1000/2 - Measuring equipment Megger - Free user manual and instructions
Find the device manual for free TDR1000/2 Megger in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Time Domain Reflectometer (TDR) for Cables |
| Brand | Megger |
| Model | TDR1000/2 |
| Dimensions (L x W x H) | 250 x 150 x 60 mm |
| Weight | 1.2 kg |
| Power Supply | 6 LR6/AA batteries or 9 V DC mains adapter |
| Battery Life | Approximately 40 hours of continuous use |
| Display | High resolution backlit LCD screen |
| Measurement Range | 10 m to 20 km depending on the cable |
| Resolution | 0.1 m |
| Main Functions | Fault location (open, short circuit), distance measurement, continuity test |
| Adjustable Propagation Velocity (Vp) | Yes, from 0.1 to 0.99 |
| Internal Memory | Storage of 50 traces |
| Communication Interface | USB port for data transfer |
| Maintenance and Cleaning | Wipe with a soft dry cloth; do not use solvents |
| Safety | Compliant with IEC 61010-1; measurement category CAT II 300 V |
| Spare Parts and Repairability | Replacement probes, test leads; repair by a Megger authorized service center |
| Included Accessories | Alligator clips, test probes, carrying case, user manual |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - TDR1000/2 Megger
How to turn on the Megger TDR1000/2?
Press the ON/OFF button on the front panel. The screen lights up and the device is ready after a short self-test.
What type of batteries to use?
Use 6 LR6/AA batteries (alkaline) or a 9 V DC mains adapter (center positive). Do not mix new and used batteries.
How to set the propagation velocity (Vp)?
Press the VP key and use the arrows to adjust the value. The Vp is usually provided by the cable manufacturer (e.g., 0.67 for a standard cable).
What to do if the screen shows nothing?
Check the batteries or power supply. If the problem persists, try resetting the device by removing the batteries for 30 seconds.
How to interpret a peak on the trace?
A downward peak indicates an open circuit (high impedance), an upward peak indicates a short circuit (low impedance). The distance is read directly on the horizontal axis.
Can we measure on a live cable?
No, the TDR1000/2 should only be connected to de-energized and discharged cables. Risk of damage and injury.
How to transfer traces to a PC?
Use the provided USB cable and the Megger Data Manager software (downloadable from the Megger website). The traces are exported in CSV format.
What is the maximum measurement range?
The range depends on the cable type and Vp. Under optimal conditions, you can measure up to 20 km on low-loss cables.
How to clean the device?
Use a soft, slightly damp cloth. Never use abrasive products or solvents. Clean the connectors with a special contact spray.
Where to find spare parts?
Contact a Megger authorized dealer or customer service. The probes and test leads are the most common parts.
User questions about TDR1000/2 Megger
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual TDR1000/2 - Megger and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TDR1000/2 by Megger.
USER MANUAL TDR1000/2 Megger
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Megger
Model : TDR1000/2
Category : Measuring equipment