SINEAX AM1000 - Measuring equipment Camille Bauer - Free user manual and instructions
Find the device manual for free SINEAX AM1000 Camille Bauer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Programmable Measuring Transducer |
| Model | SINEAX AM1000 |
| Brand | Camille Bauer |
| Dimensions (H x W x D) | 110 x 75 x 120 mm |
| Weight | Approx. 0.4 kg |
| Power Supply | AC/DC 90-260 V, 50/60 Hz |
| Power Consumption | < 5 VA |
| Input Signals | AC current, AC voltage, frequency, power (P, Q, S) |
| Output Signals | Up to 4 analog outputs (0/4-20 mA, 0-10 V) and 2 digital outputs |
| Communication Interface | RS-485 (Modbus RTU), optional Ethernet (Modbus TCP) |
| Accuracy | Class 0.2 for voltage, current; Class 0.5 for power |
| Display | Backlit LCD, 2 x 16 characters |
| Operating Temperature | -10°C to +55°C |
| Storage Temperature | -25°C to +70°C |
| Protection Rating | IP20 (front panel), IP40 (housing) |
| Mounting | DIN rail (EN 60715) or wall mount |
| Main Functions | Measurement, transformation, monitoring, and remote transmission of electrical parameters |
| Configuration | Via front panel keys and software (USB connection) |
| Maintenance & Cleaning | Wipe with dry cloth; do not use solvents. Check connections periodically. |
| Safety Standards | IEC 61010-1, CAT III 300V |
| Spare Parts & Repairability | Contact Camille Bauer service for replacements. Device is field-repairable with exchangeable modules. |
Frequently Asked Questions - SINEAX AM1000 Camille Bauer
How do I install the SINEAX AM1000 on a DIN rail?
Clip the device onto the DIN rail by pressing the bottom clip. Ensure it clicks into place. For removal, use a screwdriver to release the clip.
What power supply does the SINEAX AM1000 require?
It accepts a universal supply of AC/DC 90-260 V, 50/60 Hz. Connect L and N (or + and -) to the designated terminals.
How can I configure the analog outputs?
Use the front panel buttons or the SINEAX Config software via USB. Navigate to 'Outputs' and set the desired range (e.g., 4-20 mA) and scaling.
What does the LCD display show?
The backlit LCD shows measured values, parameter names, and configuration menus. It can display up to two lines of 16 characters each.
How do I reset the device to factory settings?
Press and hold the 'Enter' and 'Escape' keys simultaneously for 5 seconds until 'Factory Reset' appears. Confirm with 'Enter'.
Can I measure power factor with the SINEAX AM1000?
Yes, it can measure active power (kW), reactive power (kVAR), apparent power (kVA), and power factor (cos φ).
What communication protocols are supported?
The device supports Modbus RTU (RS-485) as standard. An optional module adds Modbus TCP (Ethernet).
How do I update the firmware?
Download the latest firmware from Camille Bauer's website. Use the SINEAX Config tool via USB to upload the new firmware file.
What is the accuracy for current measurement?
The accuracy is Class 0.2 for current and voltage, and Class 0.5 for power measurements.
Where can I find the wiring diagram?
Refer to the user manual page 12-15 (available for download). Typical connections include voltage inputs (L1, L2, L3, N) and current inputs (k, l) via CTs.
User questions about SINEAX AM1000 Camille Bauer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual SINEAX AM1000 - Camille Bauer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SINEAX AM1000 by Camille Bauer.
USER MANUAL SINEAX AM1000 Camille Bauer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Camille Bauer
Model : SINEAX AM1000
Category : Measuring equipment