SIRAX BM1450 - Measuring equipment Camille Bauer - Free user manual and instructions
Find the device manual for free SIRAX BM1450 Camille Bauer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Digital panel meter |
| Model | SIRAX BM1450 |
| Brand | Camille Bauer |
| Dimensions (H x W x D) | 96 mm x 96 mm x 100 mm |
| Panel cutout | 92 mm x 92 mm |
| Weight | Approx. 0.5 kg |
| Power supply | 85…265 V AC/DC |
| Power consumption | < 10 VA |
| Display | 5-digit LED, red, 14 mm height |
| Measurement functions | AC/DC voltage, AC/DC current, frequency, power, energy |
| Accuracy | ±0.1% of reading ±2 digits |
| Operating temperature | -10°C to +55°C |
| Storage temperature | -20°C to +70°C |
| Protection level (front) | IP54 (IP65 optional) |
| Safety standards | IEC 61010-1, CAT III 300 V |
| EMC compatibility | EN 61326-1 (industrial environment) |
| Mounting | Panel mount with mounting brackets |
| Connection | Screw terminals, 2.5 mm² max |
| Cleaning | Wipe with a dry, soft cloth. Do not use solvents. |
| Maintenance | No special maintenance; periodic calibration recommended every 2 years. |
| Spare parts / Repairability | Contact manufacturer or authorized service center for spare parts. |
| Manual included | Yes, free PDF download available. |
Frequently Asked Questions - SIRAX BM1450 Camille Bauer
How do I connect the SIRAX BM1450 to measure AC voltage?
For AC voltage measurement, connect the voltage inputs (typically L and N) to the corresponding terminals. Ensure the device is set to the correct measurement range. Refer to the manual for specific wiring diagrams.
What is the maximum input voltage for the SIRAX BM1450?
The device is rated for CAT III 300 V. The maximum continuous input voltage is 300 V AC/DC. Do not exceed this limit.
How can I change the display scaling?
Access the setup menu via the front buttons. Navigate to 'Scaling' option and adjust the primary and secondary scaling values as needed. Save settings before exiting.
Does the SIRAX BM1450 support Modbus communication?
The standard model does not include Modbus. However, an optional Modbus interface module may be available. Check with your supplier.
What does the 'Err' message on the display mean?
'Err' indicates a measurement error, such as overrange or invalid input. Check that the input signal is within the specified range and that the wiring is correct. If the problem persists, reset the device.
How often should I calibrate the SIRAX BM1450?
It is recommended to calibrate the device every 2 years to ensure accuracy. Calibration should be performed by a qualified lab using traceable standards.
Can I use the SIRAX BM1450 for DC current measurements?
Yes, the BM1450 can measure DC current when used with an external shunt. Connect the shunt voltage signal to the input terminals and set the device to the appropriate range.
What is the power supply requirement?
The device accepts a universal power supply of 85…265 V AC/DC. Connect to terminals marked 'P'. Ensure the supply voltage is within this range.
How do I reset the device to factory settings?
Enter the setup menu, select 'Factory Reset', and confirm. Alternatively, press and hold the 'Enter' button for 10 seconds while powering on.
Is the SIRAX BM1450 suitable for outdoor use?
The front panel has IP54 protection, suitable for indoor use or sheltered outdoor areas. For outdoor use, an IP65 version may be required.
User questions about SIRAX BM1450 Camille Bauer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual SIRAX BM1450 - Camille Bauer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SIRAX BM1450 by Camille Bauer.
USER MANUAL SIRAX BM1450 Camille Bauer
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Camille Bauer
Model : SIRAX BM1450
Category : Measuring equipment