M 5.4DSP - Receiver Match - Free user manual and instructions
Find the device manual for free M 5.4DSP Match in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Match |
| Model | M 5.4DSP |
| Product Type | Car Audio DSP Amplifier / Receiver |
| Channels | 5 (4 main + 1 subwoofer) |
| Amplifier Class | Class D |
| RMS Power (4 Ohm) | 4 x 50 W + 1 x 200 W |
| RMS Power (2 Ohm) | 4 x 75 W + 1 x 300 W |
| DSP Processor | 64-bit, 96 kHz sampling rate |
| Input Sensitivity | 0.3V – 5V (RCA) / 2V – 10V (High-level) |
| Frequency Response | 5 Hz – 22,000 Hz |
| Signal-to-Noise Ratio | > 100 dB |
| THD+N | < 0.05% |
| Bluetooth | Yes (A2DP, hands-free) |
| Inputs | 4 x RCA, high-level speaker input, optical (optional) |
| Outputs | 5 x speaker, pre-out subwoofer (RCA) |
| Dimensions (W x H x D) | 210 x 50 x 140 mm |
| Weight | 1.2 kg |
| Power Supply | 12 V DC (9.6V – 16V) |
| Fuse Rating | 30 A |
| Remote Control | Wired remote or optional Bluetooth app |
| Software | Windows/macOS setup app |
| Cleaning | Wipe with dry, soft cloth; do not use solvents |
| Safety | Disconnect power before installation/cleaning |
| Spare Parts & Repairability | Repair by authorized service center only |
| Operating Temperature | -10°C to +55°C |
Frequently Asked Questions - M 5.4DSP Match
What is the power output of the Match M 5.4DSP?
The amplifier delivers 4 x 50 W RMS at 4 Ohms for the main channels and 1 x 200 W RMS for the subwoofer channel at 4 Ohms. At 2 Ohms, it outputs 4 x 75 W and 1 x 300 W.
Does the M 5.4DSP have Bluetooth?
Yes, it includes Bluetooth for audio streaming (A2DP) and hands-free calling. You can also control settings via a dedicated app on your smartphone.
How do I connect the high-level inputs?
Use the included high-level input harness to connect directly to speaker outputs from your head unit. The amplifier automatically detects the signal and adapts the input sensitivity.
Can I adjust the crossover settings?
Yes, the built-in DSP allows independent crossover adjustments for each channel (low-pass, high-pass, band-pass) with selectable slopes. Configure using the PC software or Bluetooth app.
What is the recommended fuse size?
Use a 30 A fuse on the main power cable. For safety, install the fuse as close to the battery as possible.
How do I perform a factory reset?
Press and hold the reset button (located near the input connectors) for 5 seconds while the amplifier is powered on. This restores all settings to default.
Does the amplifier have protection features?
Yes, it includes thermal, overcurrent, and short circuit protection. If overheating, the amplifier will reduce power or shut down temporarily.
What is the maximum input voltage for high-level input?
The high-level input can handle up to 10 V RMS. For RCA inputs, the range is 0.3 V to 5 V RMS.
Can I use the M 5.4DSP without a subwoofer?
Yes, you can bridge the subwoofer channel to power a main speaker or simply leave it unused. The DSP settings allow you to route audio accordingly.
Is the amplifier compatible with both 2 Ohm and 4 Ohm speakers?
Yes, it is stable down to 2 Ohms on the main channels and 2 Ohms on the subwoofer channel. Ensure total impedance does not drop below 2 Ohms per channel.
User questions about M 5.4DSP Match
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual M 5.4DSP - Match and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M 5.4DSP by Match.
USER MANUAL M 5.4DSP Match
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Match
Model : M 5.4DSP
Category : Receiver