DS-KIS603-P - Intercom Hikvision - Free user manual and instructions
Find the device manual for free DS-KIS603-P Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Door Phone / Intercom |
| Brand | Hikvision |
| Model | DS-KIS603-P |
| Dimensions (Unit) | Approx. 140 x 90 x 30 mm (5.5 x 3.5 x 1.2 in) |
| Weight (Unit) | Approx. 300 g (0.66 lb) |
| Power Supply | 12V DC (sold separately) |
| Power Consumption | ≤ 5W |
| Camera Resolution | Up to 2 MP |
| Night Vision | Yes, IR up to 5m |
| Audio | Two-way full-duplex |
| Communication | IP-based, PoE (Power over Ethernet) capable |
| Display Support | Compatible with indoor monitors via network |
| Control | Button for call, remote unlock via monitor |
| Weatherproof Rating | IP65 (outdoor rated) |
| Operating Temperature | -40°C to 60°C (-40°F to 140°F) |
| Maintenance | Clean with a soft, dry cloth; avoid harsh chemicals |
| Safety | Low voltage DC; CE, FCC compliant |
| Spare Parts & Repairability | Parts available via Hikvision service centers; professional installation recommended |
| General Information | Part of Hikvision’s IP intercom series; supports SIP/VoIP protocols |
Frequently Asked Questions - DS-KIS603-P Hikvision
How do I connect the DS-KIS603-P to my indoor monitor?
Ensure both devices are on the same network. Use the Hikvision iVMS-4200 software to add the door station and bind it to the indoor monitor via IP address.
What power supply is required for the DS-KIS603-P?
The unit requires 12V DC power (sold separately). Alternatively, it supports PoE (Power over Ethernet) for both data and power.
Can I view the camera feed remotely on my smartphone?
Yes, you can view the feed via the Hik-Connect app after adding the device to your account. Ensure the door station is connected to the internet.
How do I reset the DS-KIS603-P to factory settings?
Press and hold the reset button (located under the base) for 10 seconds while the device is powered on. The device will reboot and restore defaults.
What is the maximum cable length for the door station?
For Ethernet (PoE), maximum cable length is 100 meters (328 ft). For 12V DC power, use appropriate gauge wire; longer runs may require a local power source.
Is the DS-KIS603-P compatible with third-party intercom systems?
It is designed to work within the Hikvision ecosystem. Compatibility with other systems may require ONVIF support or custom integration; check specifications.
How do I adjust the camera angle?
The camera housing can be tilted manually. Loosen the adjustment screw behind the faceplate, set the desired angle (up to ±30° vertical), and retighten.
What should I do if the audio is distorted?
Check network bandwidth and ensure QoS settings prioritize the intercom. Reduce the audio volume in the monitor settings. Also verify the microphone/speaker are not obstructed.
Can I use the DS-KIS603-P outdoors in rain?
Yes, the device has an IP65 rating, meaning it is dust-tight and protected against water jets. However, avoid direct water spray on the speaker/mic holes.
How do I update the firmware?
Download the latest firmware from the Hikvision website. Access the device via a web browser using its IP address, go to Maintenance > Firmware Upgrade, and upload the file.
User questions about DS-KIS603-P Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual DS-KIS603-P - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-KIS603-P by Hikvision.