DS-KD8003-IME2/S - Intercom Hikvision - Free user manual and instructions
Find the device manual for free DS-KD8003-IME2/S Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Door Station |
| Brand | Hikvision |
| Model | DS-KD8003-IME2/S |
| Display | 7-inch TFT LCD touch screen |
| Camera | 2 MP, wide-angle lens |
| Audio | Two-way full duplex |
| Communication | SIP protocol, VoIP |
| Network | 10/100 Mbps Ethernet, PoE (802.3af) |
| Power Supply | PoE or 12V DC (adapter not included) |
| Dimensions | 240 mm × 140 mm × 40 mm (approx) |
| Weight | 1.5 kg (approx) |
| Material | Aluminum alloy front panel |
| Mounting | Surface mount on wall |
| Operating Temperature | -40°C to +55°C |
| Weatherproof | IP65 (outdoor rated) |
| Key Features | Door unlock relay, motion detection, tamper alarm |
| Intercom | Yes, with indoor station |
| Number of Users | Up to 1000 (typical) |
| Storage | microSD slot (optional) |
| Protocols | ONVIF, RTSP |
| Compliance | CE, FCC, UL |
| Maintenance | Clean with soft dry cloth; avoid abrasive cleaners |
| Safety | Encryption (TLS, SRTP), tamper switch |
| Spare Parts | Not user-serviceable; contact support for repair |
Frequently Asked Questions - DS-KD8003-IME2/S Hikvision
How to reset the DS-KD8003-IME2/S to factory defaults?
Press and hold the reset button (inside the unit) for 10 seconds until the device reboots. The IP settings will revert to default (192.0.0.64).
Can this intercom be used without PoE?
Yes, it can be powered via a 12V DC adapter (not included). The adapter must supply at least 1A current.
How to connect the door unlock relay?
The relay terminal is located on the back of the unit. Connect the electric strike to the NO (Normally Open) and COM terminals. Ensure voltage and current ratings do not exceed 24V/2A.
What is the default IP address and login credentials?
Default IP: 192.0.0.64. Username: admin. Password: 12345 (or no password on some firmware versions). Change upon first login.
How to adjust the camera angle?
The camera module can be tilted manually. Loosen the screw on the side, adjust the angle (up to 30°), then tighten the screw to secure.
Does it support integration with third-party access control systems?
Yes, it supports ONVIF and RTSP protocols for integration. It can also trigger outputs via HTTP API.
How to configure the device using a web browser?
Connect the device to the network. Open a browser and enter the IP address. Use Internet Explorer or Chrome with the appropriate plugin. Default credentials apply.
What is the night vision capability?
The built-in IR LEDs allow clear monochrome vision up to 5 meters in complete darkness. The ambient light sensor automatically activates them.
How to wipe the memory before disposal?
Perform a factory reset via the menu: Settings > System > Factory Default. This will erase all configuration and user data. Alternatively, remove the microSD card if present.
What is the warranty period?
Hikvision typically provides a 3-year warranty against manufacturing defects, subject to terms and conditions. Contact your dealer for details.
User questions about DS-KD8003-IME2/S Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Intercom in PDF format for free! Find your manual DS-KD8003-IME2/S - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-KD8003-IME2/S by Hikvision.
USER MANUAL DS-KD8003-IME2/S Hikvision
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hikvision
Model : DS-KD8003-IME2/S
Category : Intercom