Bliss Wi-fi 1C.91 - Thermostat Finder - Free user manual and instructions
Find the device manual for free Bliss Wi-fi 1C.91 Finder in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Smart Thermostat |
| Brand | Finder |
| Model | Bliss Wi-fi 1C.91 |
| Connectivity | Wi-Fi 802.11 b/g/n (2.4 GHz) |
| Power Supply | 2x AA batteries (or 24VAC via common wire) |
| Dimensions (H x W x D) | 95 x 95 x 25 mm |
| Weight | 130 g (including batteries) |
| Display | Backlit LCD |
| Compatible Systems | Gas, oil, electric, heat pump (up to 2 stages) |
| Control Method | Touch buttons and mobile app |
| Main Functions | Programmable schedules, geofencing, remote control, energy reports |
| Temperature Range | 5°C to 35°C (setpoint) |
| Accuracy | ±0.5°C |
| Sensor Type | Internal NTC thermistor |
| Mounting | Wall mount (horizontal or vertical) |
| Maintenance | Clean with a soft, dry cloth; do not use liquids |
| Safety | Low voltage; overheat protection |
| Spare Parts | Batteries replaceable; no other user-serviceable parts |
| Warranty | 2 years |
Frequently Asked Questions - Bliss Wi-fi 1C.91 Finder
How do I install the Bliss Wi-fi 1C.91 thermostat?
Installation is similar to most thermostats. First, turn off power to your HVAC system. Remove the old thermostat, label wires, and connect them to the corresponding terminals on the Bliss. Mount the base to the wall, attach the display, and restore power. Follow the in-app setup guide for Wi-Fi configuration.
Can I use this thermostat with a heat pump?
Yes, the Bliss Wi-fi 1C.91 is compatible with heat pumps (up to 2 stages). Ensure your system wiring matches the O/B terminal configuration in the settings.
Does the thermostat require a common wire (C-wire)?
No, it can operate on batteries alone. However, using a C-wire (24VAC) is recommended for continuous Wi-Fi and display backlight. If you don't have a C-wire, the thermostat will work with batteries, but some features may be limited.
How do I connect the thermostat to Wi-Fi?
Download the Finder Bliss app (available for iOS and Android). Create an account, then follow the in-app instructions to put the thermostat in pairing mode. Select your Wi-Fi network and enter the password. The thermostat will connect.
Can I control the thermostat remotely?
Yes, once connected to Wi-Fi and the app, you can adjust temperature, create schedules, and view energy usage from anywhere via your smartphone.
What type of batteries does it use?
It uses 2 AA alkaline batteries. Battery life is approximately 1 year under normal use with Wi-Fi enabled.
How do I reset the thermostat to factory settings?
Go to the menu on the thermostat (or app settings) and select 'Factory Reset'. Confirm the reset. The thermostat will restart and erase all personal settings.
Is the thermostat compatible with smart home assistants?
Yes, it works with Amazon Alexa and Google Assistant. Enable the 'Finder Bliss' skill in your assistant app and link your account.
What maintenance does the thermostat need?
Periodically clean the exterior with a soft, dry cloth. Replace batteries when the low battery indicator appears. No other maintenance is required.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. You can also access it from the app's help section.
User questions about Bliss Wi-fi 1C.91 Finder
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thermostat in PDF format for free! Find your manual Bliss Wi-fi 1C.91 - Finder and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Bliss Wi-fi 1C.91 by Finder.
USER MANUAL Bliss Wi-fi 1C.91 Finder
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Finder
Model : Bliss Wi-fi 1C.91
Category : Thermostat