GS724TPPv3 - Switch NETGEAR - Free user manual and instructions
Find the device manual for free GS724TPPv3 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Gigabit PoE+ Switch |
| Model | GS724TPPv3 |
| Ports | 24 x Gigabit RJ45 PoE+, 2 x SFP |
| PoE Budget | 190W |
| Dimensions (W x D x H) | 440 x 204 x 43.2 mm (1U) |
| Weight | 3.5 kg |
| Power Supply | Internal, AC 100-240V 50/60Hz |
| Management | Web GUI, SNMP, CLI, Cloud via Insight |
| Switching Capacity | 48 Gbps |
| VLAN Support | Yes, up to 256 VLANs |
| Fan Type | Variable speed, rear exhaust |
| Noise Level | Quiet < 25 dB |
| Operating Temperature | 0°C to 50°C |
| Safety Certifications | CE, FCC, UL |
| Maintenance | Clean with dry cloth; keep vents clear |
| Repairability | Service by qualified personnel only; no user-serviceable parts |
| Spare Parts | Power supply, fan module available via NETGEAR support |
| Warranty | Lifetime limited warranty |
Frequently Asked Questions - GS724TPPv3 NETGEAR
How to reset the GS724TPPv3 to factory defaults?
Press and hold the Factory Reset button on the front panel for 10 seconds while the switch is powered on. The switch will reboot with factory settings.
What is the PoE budget and how is it distributed?
The total PoE budget is 190W. It is shared across all 24 PoE+ ports, with each port capable of delivering up to 30W. The switch automatically balances power based on device needs.
Can I manage the switch without an account?
Yes, you can access the web interface locally using the default IP address 192.168.0.239 and default credentials (admin/password). No internet connection required for local management.
How to set up VLANs on this switch?
Log into the web interface, go to Switching > VLAN. You can create 802.1Q VLANs, assign ports to VLANs, set the PVID, and configure trunk ports for inter-switch VLAN traffic.
What is the maximum cable length for PoE?
The maximum cable length for PoE (up to 30W) is 100 meters (328 feet) using Cat5e or better cable. For high-power devices, ensure proper cable quality.
Does the switch support SNMP?
Yes, it supports SNMPv1/v2c/v3. You can configure SNMP communities, trap receivers, and enable SNMP monitoring in the management interface under System > SNMP.
How to update firmware?
Download the latest firmware from NETGEAR support page. Go to Maintenance > Firmware Upgrade in the web GUI, choose the file, and click Apply. Do not power off during the update.
What is the default IP address and how to access the web interface?
The default IP is 192.168.0.239 with subnet mask 255.255.255.0. Connect your PC to any port and set a static IP in the same range (e.g., 192.168.0.100). Open browser to that IP.
Can I use this switch for security cameras?
Yes, it is ideal for IP cameras because of its high PoE budget and 24 ports. Each port can power a camera up to 30W. Use VLANs to isolate camera traffic for security.
How to enable loop protection?
In the web interface, go to Switching > Loop Protection. Enable it globally and on individual ports. The switch will shut down ports if a loop is detected to prevent network storms.
User questions about GS724TPPv3 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual GS724TPPv3 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GS724TPPv3 by NETGEAR.
USER MANUAL GS724TPPv3 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : GS724TPPv3
Category : Switch