M4350-24F4V - Switch NETGEAR - Free user manual and instructions
Find the device manual for free M4350-24F4V NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Switch |
| Model | M4350-24F4V |
| Brand | Netgear |
| Ports | 24 x Gigabit PoE+ (802.3af/at) + 4 x 10 Gigabit SFP+ |
| PoE Budget | 380W |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.2 Mpps |
| MAC Address Table | 16K entries |
| VLAN Support | Up to 4096 VLANs |
| Management | Web GUI, CLI (Telnet/SSH), SNMP v1/v2c/v3, RMON |
| Dimensions (W x D x H) | 17.32 x 11.22 x 2.20 in (440 x 285 x 56 mm) |
| Weight | 10.8 lb (4.9 kg) |
| Power Supply | Internal, 100-240V AC, 50-60Hz |
| Power Consumption | Max 450W (with PoE full load) |
| Cooling | 2 x smart fans, automatic speed control |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Safety Certifications | CE, FCC, RoHS |
| Warranty | Limited Lifetime |
| Mounting | 19" rackmount (1U), brackets included |
| Cleaning Instructions | Use a dry, lint-free cloth; avoid liquids and abrasives |
| Reparability | No user-serviceable parts; contact support for repairs |
Frequently Asked Questions - M4350-24F4V NETGEAR
How do I reset the Netgear M4350-24F4V to factory defaults?
Press and hold the reset button on the front panel for about 10 seconds using a paperclip until the LEDs flash. This restores factory settings and clears all configurations.
What is the default IP address to access the web interface?
The default IP address is 192.168.0.239. Ensure your computer is on the same subnet, then enter this IP in a browser. Default username is 'admin' and password is 'password'.
How can I update the firmware on the M4350-24F4V?
Download the latest firmware from Netgear's support site. Log into the web interface, go to 'Maintenance > Firmware Upgrade', select the file, and apply. Do not power off during the process.
Does the M4350-24F4V support Power over Ethernet (PoE)?
Yes, all 24 Gigabit ports support PoE+ (802.3af/at) with a total PoE power budget of 380W, suitable for powering devices like IP cameras and wireless access points.
What is the difference between the M4350-24F4V and the non-PoE version?
The M4350-24F4V includes PoE+ on all 24 ports, while the M4350-24G4V (non-PoE) does not. Both have 4 SFP+ uplinks. The PoE version is heavier and has a higher power supply.
How do I configure VLANs on this switch?
Access the web interface, go to 'VLAN' settings. You can create up to 4096 VLANs, assign ports to VLANs, and configure trunk ports. For advanced setup, use CLI commands like 'vlan database'.
What is the maximum power consumption of the M4350-24F4V?
The maximum power consumption is 450W when all PoE ports are delivering full power. Without PoE load, the switch consumes approximately 60W.
Can I stack multiple M4350 switches?
Yes, the M4350 series supports stacking via the SFP+ ports using 'M4350 stacking' firmware. You can stack up to 8 units for management as a single switch.
What is the warranty policy for the M4350-24F4V?
Netgear offers a limited lifetime warranty for this model, which includes hardware replacement within the warranty period. Check Netgear's website for detailed terms.
How do I clean and maintain the switch?
Turn off the switch, then gently wipe the exterior with a dry, lint-free cloth. Do not use any liquids or cleaning agents. Ensure the vents are free of dust for proper airflow.
User questions about M4350-24F4V NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual M4350-24F4V - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M4350-24F4V by NETGEAR.
USER MANUAL M4350-24F4V NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : M4350-24F4V
Category : Switch