LED Z-2000 - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED Z-2000 Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED Moving Head Light |
| Model | LED Z-2000 |
| Brand | Eurolite |
| Light Source | 200W LED |
| Beam Angle | 15° - 45° zoom |
| Color Wheel | 7 colors + open |
| Gobo Wheel | 7 rotating gobos + open |
| DMX Channels | 12/16 channels |
| Pan/Tilt | 540° / 270° |
| Power Consumption | 250W max |
| Power Supply | AC 100-240V, 50/60Hz |
| Dimensions (LxWxH) | 300 x 250 x 400 mm |
| Weight | 5.2 kg |
| Housing Material | Metal and flame-retardant plastic |
| Cooling | Fan-cooled |
| Protection Class | IP20 (indoor use only) |
| Control Modes | DMX, Master/Slave, Sound-activated, Auto |
| Display | LED menu with 4 buttons |
| Mounting | Omega bracket for truss or stand |
| Cleaning | Use a dry cloth; avoid solvents |
| Safety | Keep away from flammable materials; disconnect from power before servicing |
| Spare Parts | Contact Eurolite for replacement parts |
| Environment | Dispose in accordance with local regulations |
| Warranty | 2 years |
Frequently Asked Questions - LED Z-2000 Eurolite
How do I connect the LED Z-2000 to a DMX controller?
Use a standard 3-pin XLR cable. Connect the male end to the fixture's DMX IN and the female end to your controller. Set the DMX address via the menu.
What is the maximum ambient temperature for safe operation?
The maximum ambient temperature is 40°C (104°F). Do not operate above this limit to avoid overheating.
Can I use the fixture outdoors?
No, the LED Z-2000 has an IP20 rating and is designed for indoor use only. Exposure to moisture may damage the unit.
How do I clean the lens?
Use a soft, dry microfiber cloth. For stubborn dirt, slightly dampen the cloth with water. Never use abrasive cleaners or solvents.
The fixture does not respond to DMX. What should I check?
Verify that the DMX cable is properly connected and not damaged. Ensure the DMX address matches the controller. Also check that the fixture is not in standalone mode.
What replacement bulbs can I use?
The LED Z-2000 uses a built-in LED module that is not user-replaceable. Contact Eurolite for repair services if the LED fails.
How do I set the fixture to sound-activated mode?
Navigate to the menu, select 'Sound' mode, and enable it. The fixture will react to music via its internal microphone.
What is the recommended mounting position?
Mount the fixture securely on a truss or stand using the included omega bracket. Ensure it is stable and cannot tip over. Do not mount near heat sources.
How can I update the firmware?
Firmware updates are not user-serviceable. Contact Eurolite support for assistance with updates.
The lamp flickers intermittently. What could be the cause?
Check the power supply connection and ensure the voltage matches. If using DMX, verify that the controller is sending a stable signal. If the issue persists, the LED module may need servicing.
User questions about LED Z-2000 Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED Z-2000 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED Z-2000 by Eurolite.
USER MANUAL LED Z-2000 Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED Z-2000
Category : Lighting