LT15A - Speaker Proel - Free user manual and instructions
Find the device manual for free LT15A Proel in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Active PA loudspeaker |
| Brand | Proel |
| Model | LT15A |
| Woofer size | 15" |
| Tweeter size | 1" compression driver |
| Amplifier power | 400W RMS (peak 800W) |
| Frequency response | 50 Hz - 20 kHz |
| Maximum SPL | 126 dB |
| Impedance | 8 ohms (passive mode) |
| Input connectors | XLR combo, RCA |
| Output connectors | XLR link out |
| Built-in mixer | 2 channels (mic/line) |
| EQ controls | Bass, treble |
| Protection features | Thermal, overload, limiter |
| Enclosure material | Plywood with carpet |
| Grille | Steel with acoustic foam |
| Mounting options | Pole mount, floor monitor |
| Dimensions (WxHxD) | 45 x 70 x 38 cm |
| Weight | 20 kg |
| Power supply | 110-240V AC, 50/60 Hz |
| Power consumption | 400W |
| Accessories included | Power cord, user manual |
Frequently Asked Questions - LT15A Proel
How do I connect a microphone to the LT15A?
Use the XLR combo input on channel 1 or 2. Set the input selector to 'Mic' and adjust the gain. Connect the microphone with an XLR cable.
Can I use the LT15A as a floor monitor?
Yes, the LT15A has a trapezoidal shape and a rubber pad on the side, allowing it to be placed on its side as a wedge monitor. Ensure the speaker is stable.
What is the maximum power output?
The built-in amplifier delivers 400W RMS (800W peak). This provides a maximum SPL of 126 dB, suitable for small to medium venues.
How do I daisy-chain multiple LT15A speakers?
Use the XLR link out on the back panel to connect to the input of the next speaker. This allows you to connect multiple active speakers in a chain.
Does the LT15A have Bluetooth?
No, the LT15A does not have built-in Bluetooth. You can connect external devices using the RCA or XLR inputs.
What type of power cord is included?
A standard IEC C13 power cord is included, compatible with 110-240V AC outlets. The cord length is approximately 1.8 meters.
How do I clean the LT15A?
Use a dry or slightly damp cloth to wipe the enclosure. Avoid using solvents or abrasive cleaners. The grille can be vacuumed to remove dust.
Can I mount the LT15A on a speaker stand?
Yes, the bottom has a standard 35mm pole mount socket. Use a speaker stand rated for at least 20 kg and secure the speaker with a locking pin.
What are the protection features?
The LT15A includes thermal protection, overload protection, and a limiter to prevent distortion and damage to the drivers. The amplifier will shut down if overheated.
How do I adjust the EQ?
Use the Bass and Treble knobs on the rear panel. The bass control adjusts low frequencies (around 100 Hz) and the treble adjusts high frequencies (above 10 kHz). Turn clockwise to boost.
User questions about LT15A Proel
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual LT15A - Proel and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LT15A by Proel.
USER MANUAL LT15A Proel
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Proel
Model : LT15A
Category : Speaker