MA-120P - Receiver Omnitronic - Free user manual and instructions
Find the device manual for free MA-120P Omnitronic in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Audio/Video Receiver |
| Brand | Omnitronic |
| Model | MA-120P |
| Category | Receiver |
| Output Power (RMS) | 2 x 60 W (stereo), 120 W (mono bridge) |
| Inputs | 3x RCA line, 1x XLR mic, 1x 6.3mm jack mic |
| Outputs | 2x Speaker binding posts, 1x RCA line out, 1x 6.3mm headphone |
| Frequency Response | 20 Hz - 20 kHz ±1 dB |
| Signal-to-Noise Ratio | > 80 dB |
| Total Harmonic Distortion (THD) | < 0.05% |
| Dimensions (W x H x D) | 483 x 88 x 270 mm (19", 2U) |
| Weight | 7.5 kg |
| Power Supply | 230 V AC, 50/60 Hz |
| Power Consumption | 200 VA |
| Colour | Black |
| Cooling | Fan cooled, temperature-controlled |
| Protection Features | Short circuit, thermal overload, DC offset |
| Accessories Included | Power cord, rack mount ears, user manual |
| Recommended Use | PA systems, fixed installations, karaoke |
| Cleaning Instructions | Wipe with dry cloth; avoid liquids and solvents |
| Safety Certifications | CE, RoHS |
| Repairability | Service by qualified technician; spare parts available |
Frequently Asked Questions - MA-120P Omnitronic
What is the power output of the Omnitronic MA-120P?
The MA-120P delivers 2 x 60 W RMS in stereo mode or 120 W in mono bridge mode.
Can I connect a microphone directly to the receiver?
Yes, the MA-120P has two microphone inputs: one XLR and one 6.3mm jack, each with volume controls.
What is the recommended impedance for speakers?
For stereo use, use 4-8 ohm speakers. In bridge mode, minimum 8 ohms.
How do I set up the MA-120P in bridge mode?
Set the mode switch on the rear panel to Bridge, connect the speaker to the red binding post (positive) and the black post adjacent (negative), and use input channel 1.
Does the unit have a headphone output?
Yes, there is a 6.3mm headphone jack on the front panel, which mutes the speaker outputs when used.
Why is the fan running continuously?
The fan is temperature-controlled. It runs when the amplifier heats up. Ensure adequate ventilation and clean dust from vents.
What does the 'Protect' LED indicate?
The Protect LED lights up during startup and if a fault (short circuit, overheating) is detected. If it stays on, check connections and cooling.
Can I use this receiver for outdoor events?
The MA-120P is designed for indoor use only. For outdoor use, protect it from moisture and extreme temperatures.
What are the dimensions of the MA-120P?
The receiver fits a standard 19-inch rack and is 2U tall. Depth is about 270 mm.
Where can I find the user manual?
The manual is available for free download in PDF format at notice-facile.com or the Omnitronic website.
User questions about MA-120P Omnitronic
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual MA-120P - Omnitronic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MA-120P by Omnitronic.
USER MANUAL MA-120P Omnitronic
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Omnitronic
Model : MA-120P
Category : Receiver