YT-3618 - Uncategorized Yato - Free user manual and instructions
Find the device manual for free YT-3618 Yato in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill Driver |
| Brand | Yato |
| Model | YT-3618 |
| Power Source | 18V Li-Ion Battery |
| Voltage | 18V |
| No-Load Speed (Low) | 0-550 RPM |
| No-Load Speed (High) | 0-1800 RPM |
| Chuck Size | 13 mm Keyless |
| Max Torque | 50 Nm |
| Max Drilling Capacity (Steel) | 10 mm |
| Max Drilling Capacity (Wood) | 25 mm |
| Weight (with battery) | 1.5 kg |
| Dimensions (L x W x H) | 200 x 80 x 220 mm |
| Material | Aluminum gearbox, reinforced plastic |
| Safety Features | Overload protection, electric brake, lock-off switch |
| Included Accessories | 2x 18V batteries, charger, double-sided bit, belt clip, manual |
| Warranty | 2 years |
| Maintenance | Clean with dry cloth; keep vents free of dust |
| Cleaning | Do not use water or solvents; wipe with damp cloth only |
| Spare Parts Availability | Available from Yato authorized service centers |
| Reparability | Repairable; replaceable carbon brushes and chuck |
Frequently Asked Questions - YT-3618 Yato
How do I charge the battery for the first time?
Charge the battery fully before first use. Use the supplied charger and allow it to charge for about 60 minutes. The battery indicator will turn green when fully charged.
What is the recommended way to change drill bits?
Turn the chuck counterclockwise to open the jaws. Insert the bit and tighten clockwise manually or using the chuck key (if applicable). Ensure the bit is centered and secured.
How do I adjust the torque setting?
Rotate the torque adjustment ring to the desired setting (1-20). Lower numbers for driving screws, higher numbers for drilling. The drill will stop once the torque is reached.
What should I do if the drill stops suddenly during use?
This may be due to overload or a dead battery. Release the trigger, check the battery charge, and allow the tool to cool down. If problem persists, inspect for jams.
Can I use this drill for masonry?
The YT-3618 is not designed for masonry drilling. Use a hammer drill or rotary hammer for masonry. Attempting to drill masonry may damage the tool.
How do I maintain the drill?
Keep the tool clean and dry. Wipe with a dry cloth after use. Check carbon brushes every 50 hours of use and replace if worn. Lubricate chuck occasionally with light oil.
Is the battery interchangeable with other Yato tools?
Yes, the 18V battery is compatible with other Yato 18V cordless tools within the same series. Check the product description for compatibility.
What safety precautions should I take when using the drill?
Always wear safety glasses and hearing protection. Ensure the work area is clean. Do not wear loose clothing. Use the auxiliary handle (if provided) and keep hands away from rotating parts.
How do I store the drill when not in use?
Remove the battery and store the drill in a dry, cool place away from direct sunlight. Keep the battery partially charged (50%) for long-term storage. Store in the case provided.
Where can I find spare parts or service?
Contact an authorized Yato service center. Refer to the manual for a list of service centers or visit the Yato website. Use only genuine Yato parts for replacements.
User questions about YT-3618 Yato
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual YT-3618 - Yato and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YT-3618 by Yato.
USER MANUAL YT-3618 Yato
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Yato
Model : YT-3618
Category : Uncategorized