PD800 - Drill Powerblade - Free user manual and instructions
Find the device manual for free PD800 Powerblade in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Corded Electric Drill |
| Brand | Powerblade |
| Model | PD800 |
| Power Supply | AC 230V, 50Hz |
| Power Consumption | 800 W |
| No-Load Speed | 0-3000 RPM |
| Chuck Type | Keyless, 13 mm |
| Drilling Capacity (Steel) | 13 mm |
| Drilling Capacity (Wood) | 40 mm |
| Torque Settings | 20+1 (Drill mode) |
| Speed Control | Variable speed trigger |
| Forward/Reverse | Yes |
| Dimensions (LxWxH) | 280 x 70 x 190 mm |
| Weight | 1.8 kg |
| Cable Length | 2.5 m |
| Protection Class | Class II (Double insulated) |
| Vibration Level | < 2.5 m/s² (K=1.5 m/s²) |
| Sound Pressure Level | 85 dB(A) (K=3 dB) |
| Included Accessories | Auxiliary handle, depth gauge, belt clip |
| Maintenance | Clean ventilation slots regularly; check carbon brushes every 20h |
| Repairable Parts | Carbon brushes, chuck, switch |
Frequently Asked Questions - PD800 Powerblade
What is the power rating of the Powerblade PD800 drill?
The Powerblade PD800 drill has a power consumption of 800 W, suitable for drilling into wood, metal, and plastic.
How do I change the chuck on the PD800?
The PD800 features a keyless chuck. To change it, grip the chuck sleeve and rotate it counterclockwise to loosen, then remove the chuck. Installation is the reverse.
Can I use the drill for screwdriving?
Yes, the PD800 has torque adjustment with 20 settings for precise screwdriving, plus a drill mode for higher torque.
What is the maximum drilling capacity in steel?
The maximum drilling capacity in steel is 13 mm. For larger diameters, use a step drill or reduce speed.
How do I install the auxiliary handle?
Rotate the auxiliary handle collar to loosen, slide it onto the drill neck to the desired position, then tighten by rotating the collar clockwise.
What should I do if the drill stops working?
First, check the power cord and plug. If the drill still doesn't work, the carbon brushes may be worn; replace them via the brush caps on the motor housing.
How do I clean the drill?
Unplug the drill and wipe the exterior with a dry cloth. Clean ventilation slots with compressed air or a soft brush. Do not use solvents.
Is the PD800 suitable for hammer drilling?
No, the PD800 is a standard electric drill without hammer action. For masonry, use a hammer drill or masonry bits at low speed.
What safety precautions should I take?
Always wear safety glasses and ear protection. Keep hands away from rotating parts. Do not force the drill; let it work at its own pace.
Where can I find replacement parts?
Replacement parts like carbon brushes, chuck, and switch are available through authorized service centers or online retailers. Check the manual for part numbers.
User questions about PD800 Powerblade
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual PD800 - Powerblade and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PD800 by Powerblade.
USER MANUAL PD800 Powerblade
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Powerblade
Model : PD800
Category : Drill