LED IP T-Bar 8 QCL - Lighting Eurolite - Free user manual and instructions
Find the device manual for free LED IP T-Bar 8 QCL Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | LED IP T-Bar 8 QCL |
| Brand | Eurolite |
| Light Source | 8 x 8W quad-color LEDs (RGBW or RGBA) |
| IP Rating | IP65 (weatherproof) |
| Dimensions (H x W x D) | Approx. 335 x 1000 x 100 mm |
| Weight | Approx. 8.5 kg |
| Power Supply | AC 100-240V, 50/60 Hz |
| Power Consumption | Max. 80W |
| DMX Channels | 6, 8, 14, or 17 selectable |
| Control Modes | DMX, Master/Slave, Standalone, Sound-Active |
| Beam Angle | 25° (standard), optional 45° or 60° filters |
| Color Temperature | Adjustable via RGBA/RGBW mixing |
| Strobe Rate | 0-20 Hz |
| Housing Material | Die-cast aluminum with tempered glass front |
| Mounting | Floor standing or truss mount with omega brackets |
| Operating Temperature | -10°C to 40°C |
| Included Accessories | Omega brackets, power cord, user manual |
| Safety Features | Auto-ranging power supply, overheat protection, IP-rated seals |
| Maintenance | Clean lens with soft dry cloth; check seals annually |
| Repairability | Modular design; LEDs and power supply replaceable |
Frequently Asked Questions - LED IP T-Bar 8 QCL Eurolite
How do I set the DMX address on the LED IP T-Bar 8 QCL?
Press the Menu button to enter the menu, navigate to Address using Up/Down, press Enter, then set the desired address (1-512) using Up/Down, and press Enter to confirm.
Is this fixture suitable for outdoor use?
Yes, the fixture has an IP65 rating, making it weatherproof and suitable for outdoor use, provided all cable connections are properly sealed.
How many DMX channels does it use?
It supports multiple channel modes: 6, 8, 14, or 17 channels. Select the mode that matches your controller in the menu under Channel Mode.
Can I use it without a DMX controller?
Yes, you can use standalone modes: Sound-Active (via built-in microphone), Auto (preprogrammed shows), or Master/Slave linking multiple fixtures.
How do I clean the fixture?
Disconnect power. Use a soft, dry cloth to wipe the glass lens and housing. Do not use harsh chemicals or water. Check rubber seals annually for integrity.
What is the beam angle, and can I change it?
The standard beam angle is 25°. Optional snap-on filters are available for 45° or 60° to widen the beam.
How do I link multiple units in master/slave mode?
Set one fixture as Master (menu: Master/Slave > Master) and the others as Slave (Slave). Connect them via DMX cables. The master controls all slaves.
What type of power connector does it use?
It comes with a PowerCon compatible AC input (Neutrik model). A locking power cord is included for secure connection.
Can I replace the LEDs if they fail?
Yes, the LED modules are replaceable. Contact Eurolite service or an authorized technician for replacement parts. Do not attempt disassembly while powered.
Why is the fixture not responding to DMX?
Check that the DMX cable is properly connected and terminated. Verify the DMX address matches your controller. Ensure the fixture is in DMX mode and not in standalone. Also, check that the controller is transmitting.
User questions about LED IP T-Bar 8 QCL Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Lighting in PDF format for free! Find your manual LED IP T-Bar 8 QCL - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED IP T-Bar 8 QCL by Eurolite.
USER MANUAL LED IP T-Bar 8 QCL Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : LED IP T-Bar 8 QCL
Category : Lighting