WAX625PA-100NAS - Access Point NETGEAR - Free user manual and instructions
Find the device manual for free WAX625PA-100NAS NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | WAX625PA-100NAS |
| Brand | NETGEAR |
| Wireless Standard | WiFi 6 (802.11ax) |
| Frequency Bands | Dual-band (2.4 GHz and 5 GHz) |
| Maximum Data Rate | Up to 1.8 Gbps (combined) |
| Ethernet Port | 1 x 2.5 Gigabit Ethernet (PoE+) |
| Power Method | PoE+ (802.3at) or 12V DC adapter |
| Dimensions (W x D x H) | 7.9 x 7.9 x 1.6 in (200 x 200 x 41 mm) |
| Weight | 1.1 lb (500 g) |
| Security | WPA3, WPA2, 802.1X, MAC filtering |
| MIMO | 4x4 MU-MIMO |
| OFDMA | Supported |
| Management | Web GUI, SNMP, Cloud (NETGEAR Insight) |
| Mounting | Wall or ceiling mount (bracket included) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity | 10% to 90% non-condensing |
| LED Indicators | Power, LAN, signal strength |
| Maintenance | Clean with dry cloth; no liquids |
| Repairability | No user-serviceable parts; contact support |
Frequently Asked Questions - WAX625PA-100NAS NETGEAR
How do I set up the NETGEAR WAX625PA-100NAS access point?
Connect the access point to your network via the Ethernet port using PoE+ or a power adapter. Access the web interface by typing the default IP address (usually 192.168.0.100) in your browser. Follow the wizard to configure SSID, security (e.g., WPA3), and other settings.
What is the default login credentials for the WAX625PA?
The default username is admin and default password is password. You should change these during initial setup.
Can the WAX625PA be used outdoors?
No, this access point is designed for indoor use only. It is not weatherproof.
Does the WAX625PA support mesh networking?
Yes, when paired with a NETGEAR Insight subscription or compatible router, you can create a mesh network for seamless roaming.
What is the maximum number of clients supported?
The WAX625PA can handle up to 256 concurrent client connections under optimal conditions.
How do I reset the access point to factory defaults?
Press and hold the reset button on the device for about 10 seconds using a paperclip until the LED blinks. The device will reboot with factory settings.
Is the WAX625PA compatible with PoE injectors?
Yes, it supports 802.3at PoE+ (Power over Ethernet). A compatible PoE+ injector or switch is required.
Can I manage multiple WAX625PA units centrally?
Yes, through NETGEAR Insight cloud management platform, you can monitor and configure multiple access points from a single dashboard.
What security protocols does the WAX625PA support?
It supports WPA3, WPA2, WPA, and 802.1X with RADIUS authentication for enterprise-level security.
How do I update the firmware?
Download the latest firmware from NETGEAR support website. Log into the web interface, go to Administration > Firmware Update, and upload the file. Do not power off during update.
User questions about WAX625PA-100NAS NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual WAX625PA-100NAS - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WAX625PA-100NAS by NETGEAR.
USER MANUAL WAX625PA-100NAS NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : WAX625PA-100NAS
Category : Access Point