ProSafe WNAP210v2 - Access Point NETGEAR - Free user manual and instructions
Find the device manual for free ProSafe WNAP210v2 NETGEAR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Model | ProSafe WNAP210v2 |
| Brand | Netgear |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Data Rate | 300 Mbps |
| Ethernet Ports | 1 x 10/100/1000 Mbps (Gigabit) with PoE |
| Power over Ethernet | 802.3af PoE compliant |
| Power Supply | 12V DC, 1A (adapter included) |
| Antenna | 2 x external 5 dBi (detachable RP-SMA) |
| Security | WEP, WPA, WPA2, 802.1x |
| Management | Web interface, SNMP, Telnet |
| VLAN Support | 802.1Q VLAN tagging |
| Mounting | Wall-mount and ceiling-mount (brackets included) |
| Dimensions (W x D x H) | 177 mm x 118 mm x 22 mm |
| Weight | 0.3 kg (0.66 lbs) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Humidity | 10% to 90% non-condensing |
| Care Instructions | Wipe with a dry cloth; do not use liquid cleaners. |
| Safety Notices | Keep away from water; use only supplied power adapter. |
| Spare Parts Availability | Contact Netgear support for replacement antennas or power adapter. |
| Repairability | No user-serviceable parts; refer to qualified technician. |
Frequently Asked Questions - ProSafe WNAP210v2 NETGEAR
How do I reset the WNAP210v2 to factory defaults?
Press and hold the Reset button on the back panel for 10 seconds until the power LED blinks.
Does the WNAP210v2 support Power over Ethernet?
Yes, it supports 802.3af PoE, allowing power and data over a single Ethernet cable.
What is the default IP address of the access point?
The default IP address is 192.168.0.100. You can also use the Netgear Smart Wizard to discover it.
How can I mount the WNAP210v2 on a wall or ceiling?
Use the included mounting bracket to attach it to a wall or ceiling. Screws and anchors are provided.
Can the WNAP210v2 be used as a wireless repeater?
Yes, it can be configured as a wireless repeater or bridge in the management interface.
What security protocols are supported?
It supports WEP, WPA, WPA2, and 802.1x for enterprise authentication.
How do I access the web-based management interface?
Connect to the network, open a browser, and enter the IP address. Default credentials are admin / password.
What is the maximum number of clients supported?
The WNAP210v2 can support up to 64 simultaneous wireless clients.
How do I update the firmware?
Download the latest firmware from the Netgear support website and upload it via the web interface under Maintenance.
Is the WNAP210v2 compatible with 802.11ac devices?
No, it operates only on 2.4 GHz with 802.11b/g/n. 802.11ac devices can connect but at lower speeds.
User questions about ProSafe WNAP210v2 NETGEAR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual ProSafe WNAP210v2 - NETGEAR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProSafe WNAP210v2 by NETGEAR.
USER MANUAL ProSafe WNAP210v2 NETGEAR
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : NETGEAR
Model : ProSafe WNAP210v2
Category : Access Point