DIN28424 - Dishwasher BEKO - Free user manual and instructions
Find the device manual for free DIN28424 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Model | DIN28424 |
| Brand | Beko |
| Energy Efficiency Class | E (typical for this model) |
| Number of Place Settings | 13 |
| Width | 60 cm |
| Height | 85 cm |
| Depth | 60 cm |
| Weight | Approx. 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Noise Level | 49 dB(A) re 1 pW |
| Annual Energy Consumption | 290 kWh |
| Water Consumption per Cycle | 12 L |
| Programs | Eco 50°C, Intensive 70°C, Quick 30 min, Daily 60°C, Pre-wash |
| Additional Functions | Half Load, Extra Rinse, Delayed Start (up to 24h), Tablet Function |
| Drying System | Condensation drying (Self-cleaning condenser) |
| Water Safety System | AquaStop (AquaIntense) |
| Interior Light | Yes (LED) |
| Rinse Aid Indicator | Yes |
| Salt Container Capacity | 1.5 kg |
| Filter Type | Self-cleaning filter |
| User Manual Included | Yes (available for download) |
Frequently Asked Questions - DIN28424 BEKO
How do I start a wash cycle on my Beko DIN28424 dishwasher?
Press the On/Off button, select a program using the program selector, then press the Start/Pause button. Ensure the door is closed securely.
What should I do if the dishwasher doesn't start?
Check if the door is fully closed, the water supply is open, and the machine is properly plugged in. Also verify that the Start/Pause button was pressed. If it still doesn't start, consult the user manual for error codes.
How often should I clean the filters?
Clean the filters every 1-2 months to maintain performance. Rinse them under running water and remove any debris. Reinstall properly before use.
Can I use regular dish soap instead of dishwasher detergent?
No, only use dishwasher detergent (powder, gel, or tablets). Regular dish soap creates excessive suds and can damage the machine.
Why are my dishes not drying properly?
Ensure rinse aid is filled and the dispenser is set correctly. Select a program with drying (like Eco or Intensive). Also, open the door slightly after cycle to let steam escape.
What does the AquaStop safety system do?
AquaStop is a water protection system that shuts off water supply if a leak is detected. It prevents flooding and is located at the inlet hose connection.
How can I reduce the noise level?
Make sure the dishwasher is level and not touching cabinets. Use the Half Load option if washing fewer items. Avoid overloading.
What should I do if the error code E1 appears?
E1 indicates a water inlet issue. Check that the water tap is open and the inlet hose is not kinked. Turn off the machine, wait a few minutes, then restart. If persists, contact support.
Can I wash glassware in this dishwasher?
Yes, use the Gentle program or Eco to protect delicate items. Place glassware securely in the top rack to prevent breakage.
Where can I find the model and serial number?
The model (DIN28424) and serial number are on the rating plate located on the right side of the door or on the tub edge. Keep this information for service requests.
User questions about DIN28424 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DIN28424 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DIN28424 by BEKO.
USER MANUAL DIN28424 BEKO
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BEKO
Model : DIN28424
Category : Dishwasher