WT-60 - Measuring equipment Amprobe - Free user manual and instructions
Find the device manual for free WT-60 Amprobe in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Wireless temperature and humidity transmitter |
| Brand | Amprobe |
| Model | WT-60 |
| Use | Remote measurement of temperature and humidity |
| Dimensions (approx) | 100 x 60 x 30 mm |
| Weight (approx) | 150 g (with batteries) |
| Power supply | 2 AAA batteries (1.5 V) |
| Battery life | Up to 1 year |
| Temperature range | -40 °C to 60 °C |
| Humidity range | 0 % to 100 % RH |
| Resolution | 0.1 °C / 0.1 % RH |
| Accuracy | ±0.5 °C / ±3 % RH |
| Radio frequency | 868 MHz |
| Maximum range | 100 m in open field |
| Display | LCD with backlight |
| Features | Data logging, high/low alarms, low battery indicator |
| Care and cleaning | Clean with a soft, dry cloth. Do not use abrasive products. |
| Safety | Do not expose to extreme temperatures outside the range. Avoid immersion. |
| Spare parts | Standard AAA batteries |
| Repairability | Replace batteries. For any other repairs, contact customer service. |
| General information | Detailed manual available in PDF format. |
Frequently Asked Questions - WT-60 Amprobe
How to install the batteries in the WT-60?
Open the battery compartment on the back of the device. Insert two AAA batteries respecting polarity. Close the cover.
What is the range of the WT-60 transmitter?
The maximum range is 100 meters in open field. Obstacles (walls, metals) can reduce range.
How to set high and low alarm?
Press the 'ALARM' button to access settings. Use the arrows to set high and low thresholds. Confirm with 'SET'.
What to do if the display is blank?
Check that the batteries are correctly installed and not discharged. If the problem persists, reset the device by removing the batteries for 10 seconds.
Can I use the WT-60 outdoors?
Yes, the device is designed for outdoor use, but must be protected from immersion and extreme conditions. The operating range is -40°C to 60°C.
How to pair the sensor with the base station?
Insert batteries in the sensor. Press and hold the 'PAIR' button on the base station and the sensor simultaneously for 3 seconds. Connection is confirmed by a beep.
What is the measurement accuracy?
Accuracy is ±0.5°C for temperature and ±3% RH for relative humidity.
How to clean the WT-60?
Use a soft, dry cloth to clean the housing. Do not use solvents or abrasive products. Do not immerse the device in water.
Can the WT-60 log data?
Yes, the device can record minimum and maximum values. Refer to the manual for the recording procedure.
Where can I find the complete manual for the WT-60?
The manual is available for free download on the site notice-facile.com in PDF format.
User questions about WT-60 Amprobe
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring equipment in PDF format for free! Find your manual WT-60 - Amprobe and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WT-60 by Amprobe.
USER MANUAL WT-60 Amprobe
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Amprobe
Model : WT-60
Category : Measuring equipment