2S - Windshield wiper Hobot - Free user manual and instructions
Find the device manual for free 2S Hobot in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Automatic Window Cleaning Robot |
| Brand | Hobot |
| Model | 2S |
| Dimensions (approx.) | 30 x 30 x 12 cm |
| Weight (approx.) | 1.6 kg |
| Power Source | Rechargeable lithium-ion battery, 14.8V DC |
| Charging Time | Approximately 2-3 hours |
| Operating Time | Up to 50 minutes |
| Cleaning Area per Charge | Up to 60 m² (depending on surface condition) |
| Cleaning Methods | Automatic cleaning with water spray, dry wipe, and squeegee |
| Cleaning Modes | Edge squirt, spot clean, fast clean, manual control via remote |
| Water Tank Capacity | Approximately 80 ml |
| Safety Features | Automatic emergency stop, safety tether, drop sensor, water leak detection |
| Surface Compatibility | Smooth glass surfaces (windows, mirrors, tiles) |
| Minimum Window Thickness | 3 mm frameless glass recommended |
| Power Adapter Input | 100-240V AC, 50/60Hz |
| Remote Control | Wireless remote with directional pad and mode buttons |
| Included Accessories | Remote control, power adapter, safety tether, cleaning cloth, water filling bottle, user manual |
| Maintenance | Regular cleaning of squeegee and cloth; replace parts as needed |
| Repairability | Spare parts available (wheels, squeegee, battery, etc.) |
Frequently Asked Questions - 2S Hobot
How do I start the Hobot 2S for the first time?
Fully charge the battery for 3 hours. Attach the safety tether securely. Place the robot on a clean, wet window. Press the power button on the remote to begin automatic cleaning.
Can the Hobot 2S clean both sides of a window simultaneously?
No, the robot cleans one side at a time. To clean the other side, manually reposition the robot.
What should I do if the robot stops mid-cleaning?
Check for low battery, water tank empty, or obstruction. Press the start button again. If it stops frequently, ensure the window is smooth and clean.
How do I clean the Hobot 2S after use?
Remove the cleaning cloth and squeegee. Rinse with water and let dry. Wipe the robot's body with a damp cloth. Do not submerge in water.
Is the Hobot 2S safe to use on tinted or coated windows?
It is safe on most smooth tinted windows. Avoid using on windows with cracks or poor adhesion. Test on a small area first.
How often should I replace the cleaning cloth?
Replace the cloth every 1-3 months, or when it appears worn or dirty. Use only official Hobot replacement cloths for best results.
What is the average battery life after full charge?
Approximately 50 minutes of continuous use. The actual time depends on cleaning mode and window condition.
Can I use the Hobot 2S without the safety tether?
Always use the safety tether when operating above ground level. The tether prevents damage if the robot loses suction.
How do I pair the remote control with the robot?
The remote is pre-paired. If not, insert batteries in the remote, turn on the robot, and press the pairing button on both units for 3 seconds.
What should I do if the robot leaves streaks?
Ensure the squeegee is clean and not damaged. Use distilled water to avoid mineral deposits. Adjust the cleaning mode to fast or enhanced.
User questions about 2S Hobot
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Windshield wiper in PDF format for free! Find your manual 2S - Hobot and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 2S by Hobot.
USER MANUAL 2S Hobot
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hobot
Model : 2S
Category : Windshield wiper