Eurolite

LED DMF-4 - Lighting Eurolite - Free user manual and instructions

Find the device manual for free LED DMF-4 Eurolite in PDF.

📄 28 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Eurolite LED DMF-4 - page 16
View the manual : Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type LED DMX Effect Light
Model LED DMF-4
Light Source 4 x 10W RGBW 4-in-1 LEDs
DMX Channels 4/8/12 selectable
Control Modes DMX, Master/Slave, Auto, Sound Active
Input Voltage AC 100-240V, 50/60Hz
Power Consumption 50W max
Dimensions (L x W x H) 250 x 230 x 280 mm
Weight 2.8 kg
Housing Material Aluminum die-cast
Beam Angle 25°
Strobe Rate 0-20 Hz
Dimmer 0-100% linear
Cooling Passive convection
Protection Rating IP20
Connectors 3-pin XLR in/out, IEC power in/out
Mounting Floor stand, hanging bracket, truss clamp
Display 4-digit LED display
Operating Temperature -10°C to 40°C
Accessories Included Power cable, mounting bracket, user manual
Maintenance Wipe with dry cloth; avoid solvents
Safety Class 1, CE compliant, indoor use only
Repairability Replaceable LED modules and power supply

Frequently Asked Questions - LED DMF-4 Eurolite

How do I set the DMX address on the LED DMF-4?
Press the Mode button to access the menu, then select 'Addr' and use Up/Down buttons to set the address. Press Enter to confirm.
Can I use this fixture in daisy-chain mode?
Yes, it supports DMX daisy-chain via 3-pin XLR cables. Power link also available via IEC connectors.
What is the maximum number of fixtures in a DMX chain?
We recommend a maximum of 32 fixtures on a single DMX line to avoid signal degradation.
How do I clean the fixture?
Use a soft, dry cloth to remove dust. Do not use liquids or abrasive cleaners. Clean the lens gently to avoid scratches.
The light does not turn on. What should I check?
First, check the power cable and outlet. Then verify the DMX controller is sending data and the fixture is set to the correct mode. Also check the fuse if present.
Can I replace the LED modules?
Yes, the LED modules are replaceable. Contact Eurolite service or a qualified technician for replacement.
What is the maximum ambient temperature for operation?
The fixture can operate safely at ambient temperatures up to 40°C (104°F). Avoid prolonged use in direct sunlight.
How do I enable sound activation?
Press Mode and select 'Sound' mode. The built-in microphone will trigger light effects according to music beat. Adjust sensitivity via menu.
What is the minimum distance from flammable materials?
Keep at least 0.5 meters away from flammable surfaces and materials to prevent fire risk.
Can I use this light outdoors?
The fixture is rated IP20 for indoor use only. Do not expose to rain, moisture, or extreme humidity.

User questions about LED DMF-4 Eurolite

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Lighting in PDF format for free! Find your manual LED DMF-4 - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LED DMF-4 by Eurolite.

USER MANUAL LED DMF-4 Eurolite

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Eurolite

Model : LED DMF-4

Category : Lighting