CLA-228 - Speaker PSSO - Free user manual and instructions
Find the device manual for free CLA-228 PSSO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Speaker |
| Brand | PSSO |
| Model | CLA-228 |
| Dimensions (H x W x D) | 200 x 100 x 80 mm |
| Weight | 0.5 kg |
| Power Source | AC 100-240V 50/60Hz or built-in rechargeable battery |
| Battery Capacity | 2000 mAh |
| Playback Time | Up to 6 hours at moderate volume |
| Charging Time | Approximately 3 hours |
| Bluetooth Version | 5.0 |
| Wireless Range | 10 meters (30 feet) |
| Audio Output Power (RMS) | 10W (2 x 5W stereo) |
| Frequency Response | 80 Hz - 20 kHz |
| Impedance | 4 ohms |
| Speaker Driver | 1 x 4-inch full-range driver |
| Connectivity | Bluetooth 5.0, AUX 3.5mm, USB charging port |
| Controls | Power, Volume +/- , Play/Pause, Bluetooth pairing |
| Material | Plastic with fabric grille |
| Color | Black |
| Protection Rating | IPX4 (splash proof) |
| Warranty | 1 year |
| Package Contents | Speaker, AC charger, AUX cable, user manual |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquid cleaners. |
| Storage Conditions | Store in a cool, dry place away from direct sunlight. |
Frequently Asked Questions - CLA-228 PSSO
How do I pair my Bluetooth device with the PSSO CLA-228 speaker?
Turn on the speaker by pressing the power button. The speaker will enter pairing mode automatically (indicated by a flashing blue light). On your device, enable Bluetooth and select CLA-228 from the list. Once connected, the light will turn solid blue.
What should I do if the speaker is not turning on?
First, charge the speaker using the included AC charger for at least 3 hours. If it still doesn't turn on, try a different charging cable. If the problem persists, the battery may be faulty.
How can I reset the speaker to factory settings?
With the speaker on, press and hold the Bluetooth and Volume Up buttons simultaneously for 5 seconds until you hear a beep. The speaker will restart and clear all paired devices.
Can I use the speaker while it is charging?
Yes, you can use the speaker while it is connected to power. However, for battery health, it is recommended to use it on battery power and charge when needed.
The audio is distorted or cuts out. What can I do?
Ensure the speaker is within 10 meters of the source device and there are no obstructions. Try reducing the volume on both the speaker and source. If using AUX, check the cable connection. Also, try re-pairing Bluetooth.
How do I clean the PSSO CLA-228 speaker?
Use a soft, dry cloth to wipe the surface. For the fabric grille, you can gently use a lint roller. Avoid water or liquid cleaners to prevent damage.
What is the battery life of the speaker?
On a full charge, the speaker provides up to 6 hours of playback at moderate volume. Higher volume will reduce battery life.
Can I connect two CLA-228 speakers together for stereo sound?
Yes, the speaker supports TWS (True Wireless Stereo). Pair one speaker to your device, then press and hold the Play/Pause button on both speakers for 3 seconds to pair them together.
The speaker is not charging. What should I check?
Make sure the charger is properly connected to the speaker and a working power outlet. Try a different USB cable. If the charging indicator light does not turn on, the charging port may be damaged.
Is the speaker waterproof?
The speaker has an IPX4 rating, meaning it is splash-proof from any direction. It can withstand light rain or sweat, but do not submerge it in water.
User questions about CLA-228 PSSO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Speaker in PDF format for free! Find your manual CLA-228 - PSSO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CLA-228 by PSSO.