KOLIBRI 140 LV - Remote control toy KONTRONIK - Free user manual and instructions
Find the device manual for free KOLIBRI 140 LV KONTRONIK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Speed Controller (ESC) for Brushless Motors |
| Brand | KONTRONIK |
| Model | KOLIBRI 140 LV |
| Category | Remote Control Toy (RC Helicopter/Plane) |
| Continuous Current | 140 A |
| Peak Current | 180 A (10 sec) |
| Voltage Range | 2S – 6S LiPo (7.4 – 22.2 V) |
| BEC Output | 5.5 V / 8 A, adjustable (5.0 – 8.4 V) |
| Dimensions (L x W x H) | 80 x 35 x 15 mm |
| Weight | 115 g (including cables) |
| Motor Type | Sensorless Brushless (also supports sensored with adapter) |
| Programming | Via transmitter stick or optional ProgCard |
| Firmware Update | Via USB interface (optional) |
| Protections | Overcurrent, overtemperature, undervoltage, signal loss |
| Cooling | Passive heatsink, recommended forced airflow |
| Input Connector | 6.5 mm gold bullets (not included) |
| Motor Connector | 3.5 mm gold bullets (not included) |
| Operating Temperature | -10°C to 85°C |
| Recommended Application | RC helicopters up to 700 size, large RC planes |
| Maintenance | Keep connectors clean, avoid moisture, check for loose wires |
| Spare Parts Availability | Heat shrink, cable sets, PCBs available from service center |
| Safety | Disconnect battery when not in use, never exceed max voltage |
Frequently Asked Questions - KOLIBRI 140 LV KONTRONIK
What is the maximum number of cells for the KOLIBRI 140 LV?
The KOLIBRI 140 LV supports up to 6S LiPo (22.2 V). Do not exceed this voltage.
Can I use the ESC with a sensored motor?
Yes, the ESC can be used with sensored brushless motors by connecting an optional sensored adapter (not included).
How do I program the ESC settings?
You can program the ESC using your transmitter's stick programming or with the optional ProgCard. Refer to the manual for specific steps.
What BEC settings are available?
The BEC output is adjustable via software from 5.0 V to 8.4 V, with a continuous current of 8 A. Default is 5.5 V.
What connectors are recommended for this ESC?
For the battery input, use 6.5 mm gold bullets; for the motor, use 3.5 mm gold bullets. Connectors are not included.
Is the firmware updatable?
Yes, the ESC can be updated via the optional USB interface (sold separately). Check the Kontronik website for latest firmware.
What is the weight of the ESC?
The ESC weighs approximately 115 g including cables. Exact weight may vary slightly.
How do I reset the ESC to factory defaults?
To reset, connect the ESC and hold the button or use transmitter programming to select factory reset. Refer to manual.
Can I use this ESC in a car or boat?
The KOLIBRI series is designed for aircraft (helicopters, planes). For car/boat use, consider a dedicated ESC with reverse and water resistance.
What does the LED on the ESC indicate?
The LED shows status: solid green = armed, flashing = error (e.g., signal loss, overtemp). Consult manual for full legend.
User questions about KOLIBRI 140 LV KONTRONIK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Remote control toy in PDF format for free! Find your manual KOLIBRI 140 LV - KONTRONIK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KOLIBRI 140 LV by KONTRONIK.
USER MANUAL KOLIBRI 140 LV KONTRONIK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : KONTRONIK
Model : KOLIBRI 140 LV
Category : Remote control toy