M Series 500 - Ice Maker Manitowoc - Free user manual and instructions
Find the device manual for free M Series 500 Manitowoc in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ice Machine |
| Brand | Manitowoc |
| Model | M Series 500 |
| Ice Production | Up to 500 lbs (227 kg) per day |
| Ice Type | Dice or Half Dice |
| Condenser Type | Air-cooled or Water-cooled optional |
| Dimensions (W x D x H) | 30 in x 24 in x 38 in (76 x 61 x 97 cm) |
| Weight | Approximately 150 lbs (68 kg) |
| Electrical Requirements | 115 V, 60 Hz, 15 A |
| Refrigerant | R-404A |
| Water Connection | 3/8 in male flare |
| Drain Connection | 3/4 in female NPT |
| Ice Storage Bin Capacity | Not included, use optional bin or dispenser |
| Material | Stainless steel exterior |
| Self-Cleaning Function | Yes, with cleaning cycle |
| Filter | Optional water filter kit |
| Warranty | 3 years parts and labor, 5 years compressor |
| Compliance | NSF, UL, cUL listed |
| Installation Type | Freestanding or undercounter |
| Operating Temperature | 50°F to 100°F (10°C to 38°C) |
| Water Supply | Cold water, 20-120 psi |
| Maintenance | Daily cleaning of ice bin and monthly condenser coil cleaning |
Frequently Asked Questions - M Series 500 Manitowoc
How do I install the Manitowoc M Series 500 ice machine?
Ensure the unit is placed on a level surface with proper ventilation. Connect the water supply (3/8 in flare) and drain (3/4 in NPT). Plug into a dedicated 115V outlet. Refer to the manual for detailed steps.
What type of ice does the M Series 500 produce?
It produces dice ice (cubes) or half-dice ice depending on the selected setting. The ice is clear and hard.
How often should I clean the ice machine?
Perform a cleaning cycle every 3 months or as needed. Use a Manitowoc-approved cleaner. Also clean the condenser coils monthly to maintain efficiency.
Why is my ice machine not producing ice?
Check the water supply for blockages, ensure the unit is turned on, and verify the temperature setting. If problem persists, run a diagnostic test as described in the manual.
Does the M Series 500 require a water filter?
A water filter is optional but recommended to reduce scale and improve ice quality. Use Manitowoc part number K00061 for the filter kit.
What are the electrical requirements?
The machine requires a 115 V, 60 Hz, 15 A dedicated circuit. Do not use an extension cord. It comes with a 6-foot power cord.
Can I use the ice machine outdoors?
It is designed for indoor use only. Operating temperature should be between 50°F and 100°F. Exposure to extreme temperatures may damage the unit.
What is the warranty coverage?
Manitowoc offers 3 years parts and labor on the entire machine and 5 years on the compressor. Register your product online to activate warranty.
How do I adjust the ice thickness?
Access the control panel and adjust the ice thickness setting from 1 to 7 (1=thin, 7=thick). Refer to the manual for exact procedure.
What does the diagnostic mode display indicate?
Codes such as E1 (water low) or E5 (thermistor error) help identify issues. Press and hold the CLEAN button for 5 seconds to enter diagnostic mode. See manual for full list.
User questions about M Series 500 Manitowoc
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Ice Maker in PDF format for free! Find your manual M Series 500 - Manitowoc and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M Series 500 by Manitowoc.
USER MANUAL M Series 500 Manitowoc
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Manitowoc
Model : M Series 500
Category : Ice Maker