WM-62MC - Washing machine Infiniton - Free user manual and instructions
Find the device manual for free WM-62MC Infiniton in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Washing Machine |
| Loading Type | Front-loading |
| Capacity | 6 kg |
| Maximum Spin Speed | 1000 rpm |
| Number of Programs | 15 |
| Energy Efficiency Class | A+ |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption (Wash) | 2000 W |
| Water Consumption per Cycle | Approx. 45 L |
| Dimensions (H x W x D) | 85 cm x 60 cm x 55 cm |
| Net Weight | 60 kg |
| Noise Level (Wash/Spin) | 58 dB / 75 dB |
| Display | LED |
| Delay Start | Up to 24 hours |
| Child Lock | Yes |
| Overflow Protection | Yes |
| Maintenance: Clean Dispenser Drawer | Remove and rinse monthly |
| Maintenance: Clean Door Seal | Wipe after each use |
| Spare Parts Availability | Belts, pumps, motors available via authorized service |
| Repairability Index | 6.5 / 10 (based on manual rating) |
Frequently Asked Questions - WM-62MC Infiniton
How do I install the washing machine?
Remove all packaging and transit bolts. Place the machine on a level, sturdy floor. Connect the water inlet hose to a cold water tap with a 3/4 inch thread. Insert the drain hose into a standpipe or sink. Plug into a grounded outlet. Leave at least 2 cm clearance on all sides.
What detergent should I use?
Use high-efficiency (HE) detergent suitable for front-loaders. For 6 kg capacity, follow the dosage instructions on the detergent packaging. Avoid using too much detergent to prevent oversudsing.
How do I clean the detergent drawer?
Press the release lever inside the drawer and pull it out completely. Rinse under warm water to remove residue. Clean the recess with a small brush. Reinsert fully. Perform this monthly.
What should I do if the machine doesn't drain?
Check the drain hose for kinks or blockages. Clean the drain pump filter (located at the bottom front, behind a flap). Also check the standpipe or sink for clogs. If problem persists, contact service.
How to activate child lock?
Press and hold the 'Child Lock' button (usually marked with a padlock icon) for 3 seconds until the indicator lights up. To deactivate, repeat the same step. This prevents accidental button presses during a cycle.
Why is my laundry not spinning properly?
Uneven load distribution can cause imbalance. Pause the cycle and redistribute the laundry. Overloading the machine (more than 6 kg) can also prevent spinning. Reduce the load and select a higher spin speed if possible.
How do I use the delay start function?
Select your wash program. Press the 'Delay' button repeatedly to set the desired delay (up to 24 hours in increments of 1 hour). Press 'Start/Pause' to begin the countdown. The machine will start automatically after the delay.
What does the 'Extra Rinse' option do?
This option adds an additional rinse cycle to remove more detergent residue. It is recommended for people with sensitive skin or for washing baby clothes. Activate it before starting the program.
How to clean the drum?
Run a drum clean cycle (if available) or a hot wash (90°C) with an empty machine using a drum cleaner or a cup of white vinegar. Perform this every 2-3 months to prevent odors and mold.
Where can I find spare parts or service?
Contact Infiniton authorized service centers. You can find a list in the manual or visit the Infiniton website. Use original spare parts for safety. Common parts like belts, door seals, and pumps are available.
User questions about WM-62MC Infiniton
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Washing machine in PDF format for free! Find your manual WM-62MC - Infiniton and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WM-62MC by Infiniton.