A360 - Mixer Aviom - Free user manual and instructions
Find the device manual for free A360 Aviom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Personal Mixer for In-Ear Monitoring |
| Number of Channels | 16 |
| Input Channels | 16 mono channels via A-Net, 2 stereo aux inputs |
| Output Channels | 1 stereo headphone output, 1 line output |
| Audio Resolution | 24-bit / 48 kHz |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Total Harmonic Distortion | < 0.01% |
| Signal-to-Noise Ratio | > 110 dB |
| Power Supply | DC 9V (external power supply included) or Power-over-A-Net |
| Power Consumption | 5 W typical |
| Dimensions (W x H x D) | 18.4 cm x 6.4 cm x 14.0 cm (7.25 in x 2.5 in x 5.5 in) |
| Weight | 0.68 kg (1.5 lb) |
| Housing Material | Metal chassis with plastic front panel |
| Display | Backlit LCD, 2 x 16 characters |
| Controls | 16 rotary encoders, 4 function buttons, 1 navigation wheel |
| Connectivity | A-Net input, A-Net output, stereo aux input (3.5mm), headphone out (6.35mm), line out (6.35mm), footswitch jack |
| Compatibility | Aviom A-Net systems (e.g., A360, A320, Pro16) |
| Presets | 16 user-definable mixes with naming |
| Low-Cut Filter | Per channel: 40 Hz, 100 Hz, or off |
| Pan/Balance | Per channel |
| Phase Invert | Per channel |
| Maintenance | Wipe with dry, soft cloth; do not use solvents |
| Safety | Use only supplied power adapter; keep away from moisture |
| Spare Parts / Repairability | Contact Aviom service center; no user-serviceable parts |
Frequently Asked Questions - A360 Aviom
How do I connect the A360 to a A-Net system?
Connect the A360 to the A-Net network using a standard Cat5e/6 cable. The A-Net input receives the audio from the system, and the A-Net output can daisy-chain to another A360 or device.
Can I use the A360 without an external power supply?
Yes, if your A-Net system provides Power-over-A-Net (PoAN), the A360 can be powered directly from the A-Net cable. Otherwise, use the included 9V DC adapter.
How many channels can I control on the A360?
The A360 can mix up to 16 mono channels from the A-Net network. Each channel has a dedicated rotary encoder for level and pan control.
Can I save my mix settings?
Yes, the A360 allows you to save up to 16 custom mix presets. Use the navigation menu to store and recall your mixes.
What type of headphone should I use?
Use headphones with a 6.35mm (1/4 inch) plug and an impedance of 16-600 ohms. The headphone output is stereo and delivers sufficient power for most headphones.
How do I adjust the low-cut filter on a channel?
Select the desired channel using the navigation wheel, then press the function button assigned to the low-cut filter. You can choose between 40 Hz, 100 Hz, or off.
Is the A360 compatible with other Aviom products?
Yes, the A360 works with Aviom A-Net compatible devices such as the A320, Pro16 series, and A360II. It is designed for personal monitor mixing in live or installed sound.
What should I do if the display shows 'No A-Net'?
Check that the A-Net cable is securely connected and that the system is powered on. If using PoAN, ensure the network provides power. If the problem persists, try a different cable or restart the system.
Can I connect a footswitch to the A360?
Yes, the A360 has a footswitch jack (6.35mm) that can be used to mute all channels or recall a preset, depending on the configuration.
How do I reset the A360 to factory settings?
Hold down the Setup button while powering on the unit. Continue holding until the display shows 'Factory Reset', then release and press Enter to confirm.
User questions about A360 Aviom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixer in PDF format for free! Find your manual A360 - Aviom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. A360 by Aviom.