D800-Dante - Processor Aviom - Free user manual and instructions
Find the device manual for free D800-Dante Aviom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Audio Processor with Dante |
| Channels | 8 Inputs / 8 Outputs (Analog + Dante) |
| Form Factor | 1U Rackmount, 19" width |
| Dimensions (W x H x D) | 19.0 x 1.75 x 10.0 in (483 x 44 x 254 mm) |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | 100-240V AC, 50/60 Hz, 30W max |
| Sample Rates | 44.1, 48, 96 kHz |
| Bit Depth | 24-bit ADC/DAC |
| Dante Networking | Primary/Secondary ports, AES67 compatible |
| Analog I/O | 8 balanced XLR inputs, 8 balanced XLR outputs |
| Phantom Power | +48V, switchable per channel |
| Signal Processing | EQ, Dynamics, Delay, Matrix mixing |
| Preset Memory | 100 user presets, recall via front panel or software |
| Remote Control | Dante Controller, Aviom Pro64 software, web interface |
| Indicators | LED signal/clip per channel, sync and status LEDs |
| Cooling | Fanless passive cooling |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Warranty | 2 years limited |
Frequently Asked Questions - D800-Dante Aviom
How do I update the firmware on the D800-Dante?
Download the latest firmware from the Aviom website. Connect the unit to your network via the Dante primary port, and use the Dante Firmware Update tool or the Aviom proprietary software. Follow the on-screen instructions; do not power off during update. Always back up presets before updating.
Can the D800-Dante be used without Dante network?
Yes, you can use it as a standalone analog processor using the front panel controls. However, advanced routing and remote control require a Dante network with Dante Controller software.
What sample rates are supported?
The D800-Dante supports 44.1 kHz, 48 kHz, and 96 kHz at 24-bit depth. The sample rate must match the Dante network master clock. Change via the front panel menu or software.
How do I set up Dante networking for the first time?
Connect the primary Dante port to a gigabit switch. Power on the unit. Install Dante Controller on your PC. The device should appear automatically. Assign a unique device name, configure sample rate and latency (typically 1 ms). Save and apply.
How do I reset to factory defaults?
Press and hold the Menu button while powering on the device. Continue holding until the display shows 'Factory Reset'. Confirm with the Enter button. All presets and network settings will be erased.
What are the maximum input and output levels?
Analog inputs handle up to +24 dBu. Output level is adjustable from −∞ to +24 dBu in 0.5 dB steps. Dante digital level is 0 dBFS = +24 dBu. Match gain staging to avoid clipping.
How do I assign Dante channels for a specific show?
Use Dante Controller to create a 'subscription' between the D800-Dante's transmit and receive channels and other Dante devices. You can also use Aviom's Pro64 software for more advanced routing and mixing.
Can I use phantom power on all inputs simultaneously?
Yes, +48V phantom power can be enabled individually per channel via the front panel menu or software. Maximum total current is limited to 20 mA per channel (standard for condenser microphones).
Does the D800-Dante support AES67?
Yes, it is AES67 compatible. Enable AES67 mode in the network settings. This allows interoperability with other AES67 devices, but some advanced features may not be available.
How do I clean the device?
Disconnect power. Use a soft, dry cloth to clean the front panel and vents. Do not use liquid cleaners or aerosols. For stubborn dirt, slightly dampen the cloth with water. Ensure no moisture enters the unit.
User questions about D800-Dante Aviom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Processor in PDF format for free! Find your manual D800-Dante - Aviom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. D800-Dante by Aviom.
USER MANUAL D800-Dante Aviom
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Aviom
Model : D800-Dante
Category : Processor