THA-120PC - Effect machine Eurolite - Free user manual and instructions
Find the device manual for free THA-120PC Eurolite in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | Effect Machine (Fog Machine) |
| Brand | Eurolite |
| Model | THA-120PC |
| Power Supply | AC 230 V, 50 Hz |
| Power Consumption | 1200 W |
| Heating Element | 1200 W |
| Warm-up Time | Approx. 3 minutes |
| Fluid Consumption | Up to 120 ml/min |
| Tank Capacity | 2.5 liters |
| Output Volume | Approx. 2,000 cu.ft/min (56 m³/min) |
| Duty Cycle | 100% (continuous operation) |
| Control Methods | Remote control (included), DMX-512, Manual |
| DMX Channels | 1 channel |
| Dimensions (L x W x H) | 400 x 230 x 240 mm |
| Weight | 5.5 kg |
| Protection Class | IP20 (indoor use only) |
| Operating Temperature | 0 °C to 40 °C |
| Fluid Type | Water-based fog fluid (e.g., Eurolite Fog Fluid) |
| Maintenance | Clean every 20 hours of operation using distilled water |
| Safety Features | Overheat protection, automatic shut-off, low fluid indicator |
| Accessories Included | Wired remote control, DMX cable, manual |
| Warranty | 2 years (depending on region) |
| Repairability | Spare parts available: heating element, pump, fuse, remote control |
| Certifications | CE, RoHS |
Frequently Asked Questions - THA-120PC Eurolite
What type of fluid should I use in the Eurolite THA-120PC?
Use only water-based fog fluid designed for fog machines, such as Eurolite Fog Fluid. Do not use oil-based fluids or water alone.
How do I clean the fog machine?
After every 20 hours of operation, fill the tank with distilled water and run the machine until empty to flush the system. For stubborn residue, use a mixture of distilled water and white vinegar.
Why is my fog machine not producing fog?
Check that the machine has warmed up (approx. 3 minutes), the fluid tank is full, and the power is on. If still no fog, inspect the fuse and ensure the remote control is connected properly.
How do I connect a DMX controller?
Connect a DMX cable from the controller to the DMX input on the machine. Set the DMX address using the DIP switches (or menu) to match your controller. The machine uses 1 DMX channel for fog output.
What is the warm-up time for the THA-120PC?
The warm-up time is approximately 3 minutes. The machine will indicate when it is ready, usually by an LED changing color.
Can I use the machine continuously?
Yes, the THA-120PC has a 100% duty cycle, allowing continuous operation. However, ensure the fluid tank is refilled as needed.
What does the low fluid indicator mean?
The low fluid indicator alerts you when the fluid level is low. Refill the tank with compatible fog fluid to avoid pump damage.
How do I reset the overheat protection?
If the machine overheats, it will automatically shut off. Allow it to cool down for at least 15 minutes, then press the reset button (if equipped) or unplug and replug the power.
What are the dimensions and weight of the device?
The dimensions are 400 x 230 x 240 mm (15.7 x 9.1 x 9.4 inches) and the weight is 5.5 kg (12.1 lbs).
Is the remote control included?
Yes, a wired remote control is included. It allows manual control of fog output. Optionally, you can use DMX for remote control.
User questions about THA-120PC Eurolite
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Effect machine in PDF format for free! Find your manual THA-120PC - Eurolite and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. THA-120PC by Eurolite.
USER MANUAL THA-120PC Eurolite
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Eurolite
Model : THA-120PC
Category : Effect machine